I’m trying to pair a XBee 3 as a router with ZHA using a conbee 2 as the coordinator. However, the interview process starts and never finishes. I see the following logs during the process.
[0x0000:zdo] ZDO request ZDOCmd.Mgmt_Permit_Joining_req: [60, ]
Device 0xad53 (00:13:a2:00:41:c8:0c:1e) joined the network
Device 00:13:a2:00:41:c8:0c:1e changed id (0xd3cf => 0xad53)
[0xad53:zdo] ZDO request ZDOCmd.Device_annce: [0xAD53, 00:13:a2:00:41:c8:0c:1e, 142]
[0xad53] Requesting 'Node Descriptor'
Tries remaining: 2
[0xad53] Node Descriptor: NodeDescriptor(byte1=1, byte2=64, mac_capability_flags=142, manufacturer_code=4126, maximum_buffer_size=82, maximum_incoming_transfer_size=255, server_mask=11264, maximum_outgoing_transfer_size=255, descriptor_capability_field=0, *allocate_address=True, *complex_descriptor_available=False, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False, *is_valid=True, *logical_type=, *user_descriptor_available=False)
[0xaaaf] Discovering endpoints
Tries remaining: 3
[0xaaaf:zdo] ZDO request ZDOCmd.IEEE_addr_req: [0x0000, 0, 0]
Tries remaining: 2
Tries remaining: 1
[0xaaaf] Failed to discover active endpoints
I can see that it’s trying but for some reason it’s failing. Any ideas?