# Windows CE **URL:** https://forums.digi.com/c/embedded-devices/windows-ce/61.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [About the Windows CE category](https://forums.digi.com/t/about-the-windows-ce-category/96)
**Author:** [@system](https://forums.digi.com/u/system)\ **Replies:** 0
--- ## [SPI read delay in FT2232H with libMPSSE](https://forums.digi.com/t/spi-read-delay-in-ft2232h-with-libmpsse/23290)
**Author:** [@Eisenheim](https://forums.digi.com/u/Eisenheim)\ **Replies:** 0\ **Last updated:** [November 10, 2022, 12:44pm UTC](https://forums.digi.com/t/spi-read-delay-in-ft2232h-with-libmpsse/23290 "2022-11-10T12:44:47Z")
Hi, I have been using the ft2232 board with libmpsse module for SPI reading in windows/raspberry pi. In both cases, I read 3KB of data with 20Mhz frequency. It takes about 4ms seconds for every read. My problem is that … --- ## [how to convert default.gpj file to Makefile](https://forums.digi.com/t/how-to-convert-default-gpj-file-to-makefile/22192)
**Author:** [@Usha](https://forums.digi.com/u/Usha)\ **Replies:** 8\ **Last updated:** [April 13, 2022, 9:49am UTC](https://forums.digi.com/t/how-to-convert-default-gpj-file-to-makefile/22192 "2022-04-13T09:49:30Z")
Hi all, I am using the Green hills software with Multi IDE,created a simple project called helloworld,after compiling this project getting default.gpj file, I want to convert this default.gpj file to Makefile, I am usi… --- ## [USB Device Descriptor Request Failed](https://forums.digi.com/t/usb-device-descriptor-request-failed/22918)
**Author:** [@mrsiddle](https://forums.digi.com/u/mrsiddle)\ **Replies:** 1\ **Last updated:** [January 21, 2022, 12:17pm UTC](https://forums.digi.com/t/usb-device-descriptor-request-failed/22918 "2022-01-21T12:17:45Z")
This happened shortly after the 204 updates. Not able to identify the specific hardware causing the issue going into properties and the various details. Tried unplugging the mouse, keyboard, and webcam. Reinstalled chips… --- ## [Windows CE .NET 4.2 Help!](https://forums.digi.com/t/windows-ce-net-4-2-help/19198)
**Author:** [@gripsz](https://forums.digi.com/u/gripsz)\ **Replies:** 6\ **Last updated:** [March 2, 2018, 9:49am UTC](https://forums.digi.com/t/windows-ce-net-4-2-help/19198 "2018-03-02T09:49:16Z")
I need some help with an application we use on Windows CE devices we use. The devices are Juniper Allegro CX with windows .net 4.2 OS. The Problem we have is this: The devices use approx. 4" TOUCHSCREENs in color and i… --- ## [windows 10 iot](https://forums.digi.com/t/windows-10-iot/19047)
**Author:** [@ebsoftwork](https://forums.digi.com/u/ebsoftwork)\ **Replies:** 1\ **Last updated:** [January 31, 2018, 7:30am UTC](https://forums.digi.com/t/windows-10-iot/19047 "2018-01-31T07:30:02Z")
Hello, I’ve bought a Digi ConnectCore 6UL. It will be possible to run Windows 10 Iot on this device? Thank you in advance Best Regards Eliseo Baruzzi --- ## [Can i send command from serial port to ethernet port with digi connect me?](https://forums.digi.com/t/can-i-send-command-from-serial-port-to-ethernet-port-with-digi-connect-me/17681)
**Author:** [@andrewela](https://forums.digi.com/u/andrewela)\ **Replies:** 4\ **Last updated:** [November 30, 2016, 10:21am UTC](https://forums.digi.com/t/can-i-send-command-from-serial-port-to-ethernet-port-with-digi-connect-me/17681 "2016-11-30T10:21:47Z")
Hi, i’m a beginner in the microcontrollers world and i start with using the Digi Connect ME. After the configuration I attack the ethernet cable and the primary serial port with my PC and with HyperTerminal i start a con… --- ## [Is communication is possible b/w xbee(ED) & cc2650 sensortag(COORDINATOR)?how?](https://forums.digi.com/t/is-communication-is-possible-b-w-xbee-ed-cc2650-sensortag-coordinator-how/16525)
**Author:** [@Swathi\_Nayini](https://forums.digi.com/u/Swathi_Nayini)\ **Replies:** 1\ **Last updated:** [April 8, 2016, 5:29pm UTC](https://forums.digi.com/t/is-communication-is-possible-b-w-xbee-ed-cc2650-sensortag-coordinator-how/16525 "2016-04-08T17:29:20Z")
--- ## [NVRAM Corruption Problem](https://forums.digi.com/t/nvram-corruption-problem/5004)
**Author:** [@kpineau](https://forums.digi.com/u/kpineau)\ **Replies:** 4\ **Last updated:** [April 8, 2016, 5:05am UTC](https://forums.digi.com/t/nvram-corruption-problem/5004 "2016-04-08T05:05:57Z")
Hello, Since 2 weeks ago, I am getting this error when I am trying to access the NVRAM in Windows CE. NVRAM: Original Critical is BAD NVRAM: Mirror Critical is BAD NVRAM: Original Flash is BAD NVRAM: Mirror Flash is… --- ## [SPI problem on i.MX53 with WCE 7](https://forums.digi.com/t/spi-problem-on-i-mx53-with-wce-7/16304)
**Author:** [@handersen](https://forums.digi.com/u/handersen)\ **Replies:** 0\ **Last updated:** [February 23, 2016, 8:31am UTC](https://forums.digi.com/t/spi-problem-on-i-mx53-with-wce-7/16304 "2016-02-23T08:31:47Z")
SPI problem on i.MX53 with WCE 7 Using C# with VS2008. Communicating with device at speed 100Kbaud, 8 bit, mode 0 and CS0. When running in debug mode, it works perfectly. When running the compiled program, it is not … --- ## [No wifi adapter when removing Connection Manager](https://forums.digi.com/t/no-wifi-adapter-when-removing-connection-manager/13881)
**Author:** [@Henrik40](https://forums.digi.com/u/Henrik40)\ **Replies:** 1\ **Last updated:** [September 21, 2015, 12:25pm UTC](https://forums.digi.com/t/no-wifi-adapter-when-removing-connection-manager/13881 "2015-09-21T12:25:05Z")
Hi I want to use wlantool.exe to connect to a wifi network but i think this can only be done if I remove the Connection Manager from my OS design. (Look at the buttom of http://msdn.microsoft.com/en-us/library/gg158565(… --- ## [How can I connect to a wifi network with wlantool.exe in Compact 7?](https://forums.digi.com/t/how-can-i-connect-to-a-wifi-network-with-wlantool-exe-in-compact-7/13866)
**Author:** [@Henrik40](https://forums.digi.com/u/Henrik40)\ **Replies:** 2\ **Last updated:** [September 17, 2015, 3:32am UTC](https://forums.digi.com/t/how-can-i-connect-to-a-wifi-network-with-wlantool-exe-in-compact-7/13866 "2015-09-17T03:32:17Z")
Can someone give me an example on how to connect to a wifi network with wlantool.exe on Compact 7? From a command promt in Compact 7 I try to execute something like this: wlantool -c -i CCWMXWIFI1 -ssid CiscoNet -auth … --- ## [how to use reflector service in windows CE 7.0](https://forums.digi.com/t/how-to-use-reflector-service-in-windows-ce-7-0/15169)
**Author:** [@Prakash](https://forums.digi.com/u/Prakash)\ **Replies:** 0\ **Last updated:** [July 26, 2015, 5:47pm UTC](https://forums.digi.com/t/how-to-use-reflector-service-in-windows-ce-7-0/15169 "2015-07-26T17:47:09Z")
I am using platform builder for WEC 7.0 development. + I want to know how can i use reflector service in my user application to call user mode driver function. Anyway we can use some in built API’s like xxx\_open xxx\_clos… --- ## [How do I shutdown WCE properly ?](https://forums.digi.com/t/how-do-i-shutdown-wce-properly/14771)
**Author:** [@scastoldietml](https://forums.digi.com/u/scastoldietml)\ **Replies:** 1\ **Last updated:** [April 29, 2015, 9:09am UTC](https://forums.digi.com/t/how-do-i-shutdown-wce-properly/14771 "2015-04-29T09:09:24Z")
Hello, I have a jumpstart kit with ConnectCore Wi-i.MX53 running the Digi factory WCE7 image. Question is simple : How do I shutdown it properly ? Without any further coding/program. Exploring WCE, I only couldn’t fi… --- ## [Does Digi Device Discovery Utility run as is under Windows Embedded 7?](https://forums.digi.com/t/does-digi-device-discovery-utility-run-as-is-under-windows-embedded-7/14704)
**Author:** [@tremdez](https://forums.digi.com/u/tremdez)\ **Replies:** 6\ **Last updated:** [April 21, 2015, 9:12am UTC](https://forums.digi.com/t/does-digi-device-discovery-utility-run-as-is-under-windows-embedded-7/14704 "2015-04-21T09:12:14Z")
--- ## [What is the latest version of Digi WCE 7 BSP and where can I find it?](https://forums.digi.com/t/what-is-the-latest-version-of-digi-wce-7-bsp-and-where-can-i-find-it/14457)
**Author:** [@dirka](https://forums.digi.com/u/dirka)\ **Replies:** 1\ **Last updated:** [March 3, 2015, 1:36pm UTC](https://forums.digi.com/t/what-is-the-latest-version-of-digi-wce-7-bsp-and-where-can-i-find-it/14457 "2015-03-03T13:36:10Z")
What is the latest version of Digi WCE 7 BSP and where can I find it? --- ## [I.MX53 WCE 7, how to change digi.gif and default.htm in OS compiling](https://forums.digi.com/t/i-mx53-wce-7-how-to-change-digi-gif-and-default-htm-in-os-compiling/14395)
**Author:** [@handersen](https://forums.digi.com/u/handersen)\ **Replies:** 1\ **Last updated:** [February 24, 2015, 9:50am UTC](https://forums.digi.com/t/i-mx53-wce-7-how-to-change-digi-gif-and-default-htm-in-os-compiling/14395 "2015-02-24T09:50:52Z")
I want to change the standard webserver picture and link (digi.gif and link to www.digiembedded.com), and insert our own picture and link. When I compile the OS, the new picture and link should then be active. Best reg… --- ## [Loading Wireless Driver Version 3.2.9c ... Failed.](https://forums.digi.com/t/loading-wireless-driver-version-3-2-9c-failed/13888)
**Author:** [@Henrik40](https://forums.digi.com/u/Henrik40)\ **Replies:** 1\ **Last updated:** [January 6, 2015, 3:25pm UTC](https://forums.digi.com/t/loading-wireless-driver-version-3-2-9c-failed/13888 "2015-01-06T15:25:25Z")
Hi I have made an OS design with design template ConnectCore Wi-i.MX53. When I load the OS to the board and reboot it says: \[CCWMXWifi\]: Loading Wireless Driver Version 3.2.9c … Failed. \[ADDP\]: No wireless adapter fou… --- ## [i.MX53 Flash WCE7 image from USB](https://forums.digi.com/t/i-mx53-flash-wce7-image-from-usb/13904)
**Author:** [@Viking](https://forums.digi.com/u/Viking)\ **Replies:** 5\ **Last updated:** [November 24, 2014, 11:27am UTC](https://forums.digi.com/t/i-mx53-flash-wce7-image-from-usb/13904 "2014-11-24T11:27:51Z")
Hi, OK, I’m running out of ideas. I’m working on a CCWi-i.MX53 JSK. What I’m trying to figure out is - as you might have guessed - to flash a WCE image from an USB stick. Based on http://www.digi.com/support/kbase/kba… --- ## [How to show a command promt in Compact 7 ?](https://forums.digi.com/t/how-to-show-a-command-promt-in-compact-7/13862)
**Author:** [@Henrik40](https://forums.digi.com/u/Henrik40)\ **Replies:** 1\ **Last updated:** [November 4, 2014, 8:58am UTC](https://forums.digi.com/t/how-to-show-a-command-promt-in-compact-7/13862 "2014-11-04T08:58:50Z")
I just want to open a command promt in Compact 7 on a Digi CCWi-i.MX53 board. When i write “cmd” in Run under the Start menu it gives this error: “CMD cannot start. Low on memory or too many console windows open. Please … --- ## [How can I get a list of WIFI networks and connect to a WIFI network in Windows Embedded Compact 7 ?](https://forums.digi.com/t/how-can-i-get-a-list-of-wifi-networks-and-connect-to-a-wifi-network-in-windows-embedded-compact-7/13853)
**Author:** [@Henrik40](https://forums.digi.com/u/Henrik40)\ **Replies:** 1\ **Last updated:** [November 3, 2014, 4:05pm UTC](https://forums.digi.com/t/how-can-i-get-a-list-of-wifi-networks-and-connect-to-a-wifi-network-in-windows-embedded-compact-7/13853 "2014-11-03T16:05:29Z")
The example “Managed Wifi API” in https://managedwifi.codeplex.com/ can find a list of Wifi networks and connect to one, but when I run it under Windows Embedded Compact 7 .NET 3.5 it tells me that a lot of the API call… --- ## [How can I get a list of WIFI networks and connect to a WIFI network in Windows Embedded Compact 7 ?](https://forums.digi.com/t/how-can-i-get-a-list-of-wifi-networks-and-connect-to-a-wifi-network-in-windows-embedded-compact-7/13852)
**Author:** [@Henrik40](https://forums.digi.com/u/Henrik40)\ **Replies:** 0\ **Last updated:** [November 3, 2014, 6:08am UTC](https://forums.digi.com/t/how-can-i-get-a-list-of-wifi-networks-and-connect-to-a-wifi-network-in-windows-embedded-compact-7/13852 "2014-11-03T06:08:39Z")
The example “Managed Wifi API” in https://managedwifi.codeplex.com/ can find a list of Wifi networks and connect to one, but when I run it under Windows Embedded Compact 7 .NET 3.5 it tells me that a lot of the API calls… --- ## [CC-wi.Imx53 power](https://forums.digi.com/t/cc-wi-imx53-power/13641)
**Author:** [@superf4ur](https://forums.digi.com/u/superf4ur)\ **Replies:** 3\ **Last updated:** [September 25, 2014, 1:33am UTC](https://forums.digi.com/t/cc-wi-imx53-power/13641 "2014-09-25T01:33:06Z")
Hi On the cc-wi.imx53 kit, what is the voltage of VCHRG? there is a chip LM22676TJE-ADJ on the CHARGER part, what is the differents between LM22676TJE-ADJ and LM22676-ADJ? from the LM22676-ADJ manual, I know that the c… --- ## [Imx53 module pins which not to be used, how to deal with them?](https://forums.digi.com/t/imx53-module-pins-which-not-to-be-used-how-to-deal-with-them/13611)
**Author:** [@superf4ur](https://forums.digi.com/u/superf4ur)\ **Replies:** 1\ **Last updated:** [September 22, 2014, 12:47am UTC](https://forums.digi.com/t/imx53-module-pins-which-not-to-be-used-how-to-deal-with-them/13611 "2014-09-22T00:47:23Z")
Hello on the imx53 module, some pins were not be used on the development board, just used for imx53 module, if custom a board, the pins can be set to GPIO? otherwise, the pins will be pull up/down or dangling? Thanks --- ## [i.MX53 JSK with Windowc CE 7, how to boot new wce from microSD using uboot](https://forums.digi.com/t/i-mx53-jsk-with-windowc-ce-7-how-to-boot-new-wce-from-microsd-using-uboot/13076)
**Author:** [@handersen](https://forums.digi.com/u/handersen)\ **Replies:** 6\ **Last updated:** [August 28, 2014, 7:59am UTC](https://forums.digi.com/t/i-mx53-jsk-with-windowc-ce-7-how-to-boot-new-wce-from-microsd-using-uboot/13076 "2014-08-28T07:59:49Z")
I want to boot manually wce on the i.MX53 JSK from microSD from the uboot. The microSD is a 2 GB which is in FAT. I have placed the nk.bin on the microSD. I guess the uboot command should be dboot wce mmc 1:1 fat nk.b… --- ## [WCE and i.MX53, install WCE on a new module](https://forums.digi.com/t/wce-and-i-mx53-install-wce-on-a-new-module/13521)
**Author:** [@handersen](https://forums.digi.com/u/handersen)\ **Replies:** 1\ **Last updated:** [August 28, 2014, 2:43am UTC](https://forums.digi.com/t/wce-and-i-mx53-install-wce-on-a-new-module/13521 "2014-08-28T02:43:19Z")
What is the procedure to install WCE on brand new i.MX53 modules? I have the the “ConnectCore for i.MX53 JumpStart Kit for Microsoft Windows Embedded Compact 7” where I have access to the serial terminal and the SD card… --- ## [Previous SDK installed](https://forums.digi.com/t/previous-sdk-installed/13147)
**Author:** [@ikhan](https://forums.digi.com/u/ikhan)\ **Replies:** 3\ **Last updated:** [June 18, 2014, 12:52am UTC](https://forums.digi.com/t/previous-sdk-installed/13147 "2014-06-18T00:52:53Z")
Hello, I am trying to install WinCE 6 Digi Jumpstart kit onto my PC and its giving me an error: “You have previous SDK installed on your computer you must uninstall it by hand before continue the installation process. A… --- ## [digi add-ins\>serial console can't open in virtualbox](https://forums.digi.com/t/digi-add-ins-serial-console-cant-open-in-virtualbox/11174)
**Author:** [@lener](https://forums.digi.com/u/lener)\ **Replies:** 1\ **Last updated:** [June 10, 2014, 7:51am UTC](https://forums.digi.com/t/digi-add-ins-serial-console-cant-open-in-virtualbox/11174 "2014-06-10T07:51:30Z")
I install win7 in virutalbox, and also install vs2008 ,wince7 and digi jump start kit. But I just find I can’t open serial console in digi add-ins menu. it just nothing happen, no error prompt. Any solution to help wi… --- ## [i.MX53 JSK with wce, no boot after envreset in uboot](https://forums.digi.com/t/i-mx53-jsk-with-wce-no-boot-after-envreset-in-uboot/13067)
**Author:** [@handersen](https://forums.digi.com/u/handersen)\ **Replies:** 4\ **Last updated:** [June 4, 2014, 4:40am UTC](https://forums.digi.com/t/i-mx53-jsk-with-wce-no-boot-after-envreset-in-uboot/13067 "2014-06-04T04:40:40Z")
My i.MX53 JSK with wce was working perfectly, but after a envreset in the uboot, the system will not boot, but stops in uboot after “autoscript from TPTF…\[not avaible\]” - and does not come with “hit any key to stop autob… --- ## [How to stop U-Boot IP settings from being applied to WinCE](https://forums.digi.com/t/how-to-stop-u-boot-ip-settings-from-being-applied-to-wince/12888)
**Author:** [@AndrewHogan](https://forums.digi.com/u/AndrewHogan)\ **Replies:** 3\ **Last updated:** [May 5, 2014, 5:09am UTC](https://forums.digi.com/t/how-to-stop-u-boot-ip-settings-from-being-applied-to-wince/12888 "2014-05-05T05:09:47Z")
I am using WinCE7 image built by a third party on a CC-WMX53-CE platform. I apply network settings that are saved in the registry (such as the IP address, or whether DHCP is enabled). These settings work correctly and ar… [Next page](https://forums.digi.com/c/embedded-devices/windows-ce/61.md?page=1)