# XBee & XBee Gateway **URL:** https://forums.digi.com/c/xbee-xbee-gateway/8.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [About the XBee & XBee Gateway category](https://forums.digi.com/t/about-the-xbee-xbee-gateway-category/43)
**Author:** [@system](https://forums.digi.com/u/system)\ **Replies:** 0
This category is about the Digi XBee and XBee Gateway Products. Such as the XBee 802.15.4, Digi Mesh, XBee Zigbee, IX15, Connect Port X products and the XBee Industrial Gateway. --- ## [XB24CZ7WIT-004 RevM (Model: S2CTH).](https://forums.digi.com/t/xb24cz7wit-004-revm-model-s2cth/38685)
**Author:** [@Akacha\_Mohamed](https://forums.digi.com/u/Akacha_Mohamed)\ **Replies:** 3\ **Last updated:** [September 9, 2026, 1:21pm UTC](https://forums.digi.com/t/xb24cz7wit-004-revm-model-s2cth/38685 "2026-09-09T13:21:51Z")
Here is my problem: I configured this module in API mode 1 as a router, and another module as a coordinator. I use other XBee modules and they work fine, but when I use this specific reference, it always returns this pro… --- ## [Where we can find Password for Xbee 3 cellular to register device in Remote Management Plateform](https://forums.digi.com/t/where-we-can-find-password-for-xbee-3-cellular-to-register-device-in-remote-management-plateform/38667)
**Author:** [@mehdi80](https://forums.digi.com/u/mehdi80)\ **Replies:** 1\ **Last updated:** [August 31, 2026, 11:44am UTC](https://forums.digi.com/t/where-we-can-find-password-for-xbee-3-cellular-to-register-device-in-remote-management-plateform/38667 "2026-08-31T11:44:47Z")
Hi, I buy DEv board with Xbee 3 Cellular LTE-m. Right now i try to add my device to the Digi Remote Management but it ask me IMEI (i have it) but no password in the dev box . How to do ? Thanks --- ## [XCTU version 9.9.9 for XBee3 Cellular firmware upgrade?](https://forums.digi.com/t/xctu-version-9-9-9-for-xbee3-cellular-firmware-upgrade/38666)
**Author:** [@bevenson](https://forums.digi.com/u/bevenson)\ **Replies:** 1\ **Last updated:** [August 27, 2026, 4:56pm UTC](https://forums.digi.com/t/xctu-version-9-9-9-for-xbee3-cellular-firmware-upgrade/38666 "2026-08-27T16:56:54Z")
I’m using a XB3-C-GM2-UT-001 that is at firmware version 11620. I have XCTU version 6.5.13, which is the latest available at this time. I see that firmware version 11621 is available. However, when I attempt to program t… --- ## [XBee 3 Global LTE Cat 1 TCP server accepts handshake but closes before acknowledging first Modbus/TCP request](https://forums.digi.com/t/xbee-3-global-lte-cat-1-tcp-server-accepts-handshake-but-closes-before-acknowledging-first-modbus-tcp-request/38652)
**Author:** [@mkconspec](https://forums.digi.com/u/mkconspec)\ **Replies:** 1\ **Last updated:** [August 19, 2026, 2:20pm UTC](https://forums.digi.com/t/xbee-3-global-lte-cat-1-tcp-server-accepts-handshake-but-closes-before-acknowledging-first-modbus-tcp-request/38652 "2026-08-19T14:20:34Z")
We are seeing a second failure pattern with the same XBee 3 Global LTE Cat 1 configuration: Firmware 11521 Transparent TCP Server on port 502 Modbus TCP client on Windows XBee TS = 7.5 seconds Cellular private network … --- ## [XBee 3 Global LTE Cat 1 Transparent TCP Server stops answering new SYNs after silent network interruption(?)](https://forums.digi.com/t/xbee-3-global-lte-cat-1-transparent-tcp-server-stops-answering-new-syns-after-silent-network-interruption/38650)
**Author:** [@mkconspec](https://forums.digi.com/u/mkconspec)\ **Replies:** 3\ **Last updated:** [August 19, 2026, 2:16pm UTC](https://forums.digi.com/t/xbee-3-global-lte-cat-1-transparent-tcp-server-stops-answering-new-syns-after-silent-network-interruption/38650 "2026-08-19T14:16:14Z")
We are using Digi XBee 3 Global LTE Cat 1 modules as Modbus TCP servers in Transparent Mode. Configuration: Module: XBee 3 Global LTE Cat 1 (XB3-C-G1-UT-001) Firmware: 11521 Transparent TCP Server, listening on port 5… --- ## [KiCad Footprint Not Available for CC-WST-DW69-NM](https://forums.digi.com/t/kicad-footprint-not-available-for-cc-wst-dw69-nm/38653)
**Author:** [@devidmark](https://forums.digi.com/u/devidmark)\ **Replies:** 0\ **Last updated:** [August 19, 2026, 6:40am UTC](https://forums.digi.com/t/kicad-footprint-not-available-for-cc-wst-dw69-nm/38653 "2026-08-19T06:40:05Z")
Hello, I’m working on a PCB design that requires the component with Manufacturer Part Number CC-WST-DW69-NM. However, I’m unable to find a KiCad-compatible footprint for this part. The footprint provided by the DIGI is… --- ## [LORA and LORAWAN Module](https://forums.digi.com/t/lora-and-lorawan-module/38639)
**Author:** [@mehdi80](https://forums.digi.com/u/mehdi80)\ **Replies:** 3\ **Last updated:** [August 14, 2026, 3:57pm UTC](https://forums.digi.com/t/lora-and-lorawan-module/38639 "2026-08-14T15:57:05Z")
Hi, I m interesting by the LORA technology and I see the DIGI LORA Module. But i am confused about there products. I need to create a slave device using LORA Module and they send data to LORA NODE (Gateway) to be send i… --- ## [XBee PRO XR Communication with XBee PRO SX](https://forums.digi.com/t/xbee-pro-xr-communication-with-xbee-pro-sx/38623)
**Author:** [@ajax70](https://forums.digi.com/u/ajax70)\ **Replies:** 1\ **Last updated:** [August 6, 2026, 2:17pm UTC](https://forums.digi.com/t/xbee-pro-xr-communication-with-xbee-pro-sx/38623 "2026-08-06T14:17:11Z")
I have the discontinued XBee PRO SX radios that are currently running on the legacy firmware version XTC Hopping. My goal is to get an XBee PRO XR radio to communicate with the deprecated SX radios. Is there firmware tha… --- ## [Need Slaes Contacts - No one response me!](https://forums.digi.com/t/need-slaes-contacts-no-one-response-me/38624)
**Author:** [@mehdi80](https://forums.digi.com/u/mehdi80)\ **Replies:** 0\ **Last updated:** [August 5, 2026, 6:45pm UTC](https://forums.digi.com/t/need-slaes-contacts-no-one-response-me/38624 "2026-08-05T18:45:18Z")
Hello, We buy the Dev Board Xbee3 Cellular LTE-M and we would like to explore the Remote Manager Platform. We try to contact sale from form in the web site no response ..!! Can someone has a email contact we are in CA… --- ## [XBEE3 PRO data payload transmission and data loss](https://forums.digi.com/t/xbee3-pro-data-payload-transmission-and-data-loss/38602)
**Author:** [@devel\_sopa](https://forums.digi.com/u/devel_sopa)\ **Replies:** 1\ **Last updated:** [July 27, 2026, 11:42am UTC](https://forums.digi.com/t/xbee3-pro-data-payload-transmission-and-data-loss/38602 "2026-07-27T11:42:30Z")
I am using XBEE3 pro module, created 3 networks with different channels and PAN ID, each network contains around 2 to 4 router devices (XBEE3 PRO. I have configured legacy network by creating coordinator for each networ… --- ## [How to update to 37.00.128 rev 2 on XB3-C-GM1-UT-001](https://forums.digi.com/t/how-to-update-to-37-00-128-rev-2-on-xb3-c-gm1-ut-001/38584)
**Author:** [@AthenaIndustrial](https://forums.digi.com/u/AthenaIndustrial)\ **Replies:** 7\ **Last updated:** [July 20, 2026, 11:48am UTC](https://forums.digi.com/t/how-to-update-to-37-00-128-rev-2-on-xb3-c-gm1-ut-001/38584 "2026-07-20T11:48:05Z")
We have 50 XB3-C-GM1-UT-001 radios that have been updated to the latest FW 11721 and Modem FW 37.00.128 (the latest xx8 release from Telit) With this release we are now able to use multi-provider sim cards, it works … --- ## [XB3-C-GM2-UT-001 Band support mismatch](https://forums.digi.com/t/xb3-c-gm2-ut-001-band-support-mismatch/38586)
**Author:** [@bevenson](https://forums.digi.com/u/bevenson)\ **Replies:** 5\ **Last updated:** [July 20, 2026, 11:44am UTC](https://forums.digi.com/t/xb3-c-gm2-ut-001-band-support-mismatch/38586 "2026-07-20T11:44:54Z")
According to the XB3-C-GM2-UT-001 specifications and user manual, this module should support the following cellular bands: LTE Bands: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B71, B85; … --- ## [ATHS lookup table?](https://forums.digi.com/t/aths-lookup-table/38544)
**Author:** [@bevenson](https://forums.digi.com/u/bevenson)\ **Replies:** 2\ **Last updated:** [July 2, 2026, 1:32pm UTC](https://forums.digi.com/t/aths-lookup-table/38544 "2026-07-02T13:32:16Z")
We have a mix of the legacy XB3-C-A2-UT-001 and the current XB3-C-GM2-UT-001 deployed in the field. I’m trying to identify which is which for a site with AT commands. I don’t see any AT command that reports this version … --- ## [900HP DigiMesh: local AT unresponsive + reverse RREQ flooding under concurrent load — recover without a reset?](https://forums.digi.com/t/900hp-digimesh-local-at-unresponsive-reverse-rreq-flooding-under-concurrent-load-recover-without-a-reset/38534)
**Author:** [@hlyu-coencorp.com](https://forums.digi.com/u/hlyu-coencorp.com)\ **Replies:** 1\ **Last updated:** [June 29, 2026, 12:22pm UTC](https://forums.digi.com/t/900hp-digimesh-local-at-unresponsive-reverse-rreq-flooding-under-concurrent-load-recover-without-a-reset/38534 "2026-06-29T12:22:25Z")
Module: XBee-PRO 900HP, firmware VR=0x8075, DigiMesh, API mode, host MCU on UART. Setup: one mains-powered sink (host MCU + 900HP) and up to 11 battery “leaf” nodes that are powered FULLY OFF between uses (not DigiMesh… --- ## [MAC OS Warning Intel](https://forums.digi.com/t/mac-os-warning-intel/38508)
**Author:** [@Zaemo](https://forums.digi.com/u/Zaemo)\ **Replies:** 5\ **Last updated:** [June 10, 2026, 11:53am UTC](https://forums.digi.com/t/mac-os-warning-intel/38508 "2026-06-10T11:53:53Z")
I get a warning when I open XCTU on my MacBook Pro with M1 processor. It states that XCTU may no longer run on non-Intel machines. Will there be some kind of rebuild to address this? Thank you, Z --- ## [What voltage is required for the Digi XBee SX 900 to transmit at its full 1 W power output?](https://forums.digi.com/t/what-voltage-is-required-for-the-digi-xbee-sx-900-to-transmit-at-its-full-1-w-power-output/38511)
**Author:** [@koffan](https://forums.digi.com/u/koffan)\ **Replies:** 2\ **Last updated:** [June 5, 2026, 1:10pm UTC](https://forums.digi.com/t/what-voltage-is-required-for-the-digi-xbee-sx-900-to-transmit-at-its-full-1-w-power-output/38511 "2026-06-05T13:10:11Z")
The Digi XBee SX 900 datasheet specifies a 3.3 V supply voltage and states that the module can transmit at up to 1 W output power. However, the PL parameter description in XCTU indicates that a supply voltage of 5 V or h… --- ## [XBee 3 LTE-M/NB-IoT: MAIN.PY wont respond to SMS when in AP=0 Transparent Mode](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-main-py-wont-respond-to-sms-when-in-ap-0-transparent-mode/38470)
**Author:** [@jackson](https://forums.digi.com/u/jackson)\ **Replies:** 8\ **Last updated:** [June 2, 2026, 2:13pm UTC](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-main-py-wont-respond-to-sms-when-in-ap-0-transparent-mode/38470 "2026-06-02T14:13:41Z")
XBee 3 LTE-M/NB-IoT cellular module. Using XBee Studio and the Xbee TH Dev Kit board. PS=1 MicroPython Auto-Start enabled Main.py executes fine when in AP=4 MicroPython REPL mode. The module responds correctly to a “… --- ## [DigiMesh 900HP: leaf→sink unicast routes through a relay fine, but sink→leaf unicast fails \`0x01\` (MAC ACK fail) — sink attempts direct delivery instead of routing through the same relay. Why?](https://forums.digi.com/t/digimesh-900hp-leaf-sink-unicast-routes-through-a-relay-fine-but-sink-leaf-unicast-fails-0x01-mac-ack-fail-sink-attempts-direct-delivery-instead-of-routing-through-the-same-relay-why/38492)
**Author:** [@hlyu-coencorp.com](https://forums.digi.com/u/hlyu-coencorp.com)\ **Replies:** 2\ **Last updated:** [May 29, 2026, 5:56pm UTC](https://forums.digi.com/t/digimesh-900hp-leaf-sink-unicast-routes-through-a-relay-fine-but-sink-leaf-unicast-fails-0x01-mac-ack-fail-sink-attempts-direct-delivery-instead-of-routing-through-the-same-relay-why/38492 "2026-05-29T17:56:09Z")
Hi all, I have a 3-node DigiMesh network where the forward direction routes through an intermediate correctly, but the reverse direction will not — the sink keeps attempting a direct (single-hop) delivery to an out-of-r… --- ## [Footprints and symbols for the Xbee RR module (SMA antenna, and others?)](https://forums.digi.com/t/footprints-and-symbols-for-the-xbee-rr-module-sma-antenna-and-others/38494)
**Author:** [@Ryanumass](https://forums.digi.com/u/Ryanumass)\ **Replies:** 1\ **Last updated:** [May 28, 2026, 3:58pm UTC](https://forums.digi.com/t/footprints-and-symbols-for-the-xbee-rr-module-sma-antenna-and-others/38494 "2026-05-28T15:58:31Z")
Is there anywhere to get footprints and symbols for the Xbee RR? it’s an important component in a design and files on it have been very hard to come by. --- ## [XBee-PRO 900HP / S3B — 0x10 Tx Request fails when Tx Options bit 0x80 (Trace Route) is set; works fine without it](https://forums.digi.com/t/xbee-pro-900hp-s3b-0x10-tx-request-fails-when-tx-options-bit-0x80-trace-route-is-set-works-fine-without-it/38482)
**Author:** [@hlyu-coencorp.com](https://forums.digi.com/u/hlyu-coencorp.com)\ **Replies:** 1\ **Last updated:** [May 28, 2026, 12:17pm UTC](https://forums.digi.com/t/xbee-pro-900hp-s3b-0x10-tx-request-fails-when-tx-options-bit-0x80-trace-route-is-set-works-fine-without-it/38482 "2026-05-28T12:17:12Z")
Hi all, I’m building a custom firmware for a HCS08-based host that drives an XBee-PRO 900HP (S3B) over UART in API mode (AP=1). The module runs DigiMesh firmware. Unicast packets work normally until I enable Trace Rout… --- ## [XBee 3 LTE-M/NB-IoT: Reading module AP setting causes outbound TCP conenction to open](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-reading-module-ap-setting-causes-outbound-tcp-conenction-to-open/38468)
**Author:** [@jackson](https://forums.digi.com/u/jackson)\ **Replies:** 6\ **Last updated:** [May 22, 2026, 1:10pm UTC](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-reading-module-ap-setting-causes-outbound-tcp-conenction-to-open/38468 "2026-05-22T13:10:24Z")
XBee 3 LTE-M/NB-IoT cellular module. Using XBee Studio and the Xbee TH Dev Kit. DL=98.122.42.xxx Dest IP OD=0.0.0.0 Operating dest IP DE=50 Dest port C0=51 Listen port AP=0 Transparent mode PS=0 Micropy… --- ## [Xbee S2C mesh Configurations](https://forums.digi.com/t/xbee-s2c-mesh-configurations/38427)
**Author:** [@Badri\_emir](https://forums.digi.com/u/Badri_emir)\ **Replies:** 3\ **Last updated:** [May 20, 2026, 11:52am UTC](https://forums.digi.com/t/xbee-s2c-mesh-configurations/38427 "2026-05-20T11:52:01Z")
Hello everyone I am working on a basic mesh with 3 shield Xbee S2C , coordinator and 2 routers , on Xctu I find this firmware ( ZIGBEE TH REG) I integrate it , I but the mesh is not done . I need the Configurations plea… --- ## [XCTU keeps resetting my xbee](https://forums.digi.com/t/xctu-keeps-resetting-my-xbee/35982)
**Author:** [@a.fouet](https://forums.digi.com/u/a.fouet)\ **Replies:** 17\ **Last updated:** [May 15, 2026, 7:27pm UTC](https://forums.digi.com/t/xctu-keeps-resetting-my-xbee/35982 "2026-05-15T19:27:56Z")
Hello. I have a pair of xbee3 modules ( XB3-24Z8PT-J). When i try to connect to them using xctu, it works about 1 time in 10, and even when it works, it shoes the model type, them , i keep having messages ‘auto resettin… --- ## [XBee 3 LTE-M/NB-IoT: Transparent mode with MicroPython keepalives](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-transparent-mode-with-micropython-keepalives/38412)
**Author:** [@jackson](https://forums.digi.com/u/jackson)\ **Replies:** 4\ **Last updated:** [May 13, 2026, 2:32pm UTC](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-transparent-mode-with-micropython-keepalives/38412 "2026-05-13T14:32:47Z")
I have Transparent Mode (AP=0) working to read sensor data over cellular from our server. I need to use Auto-Start (PS=1) MicroPython to initiate the outgoing cellular TCP connection, and send keepalives keep it open. T… --- ## [Where is RS-485 ENABLE (was DIO7) on cellular XBee 3 LTE-M/NB-IOT?](https://forums.digi.com/t/where-is-rs-485-enable-was-dio7-on-cellular-xbee-3-lte-m-nb-iot/38399)
**Author:** [@jackson](https://forums.digi.com/u/jackson)\ **Replies:** 3\ **Last updated:** [May 12, 2026, 2:26pm UTC](https://forums.digi.com/t/where-is-rs-485-enable-was-dio7-on-cellular-xbee-3-lte-m-nb-iot/38399 "2026-05-12T14:26:41Z")
I’ve used many XBee/XBee3 900 MHz, 2.4 GHz, etc. You could set DIO7 to 7 “RS-485 Enable, High” on all of them. When data is ready to go out via serial, this pin would go high. This puts the RS-485 transciever chips in… --- ## [Digi XBee LPX 900 RF Module Compatibility](https://forums.digi.com/t/digi-xbee-lpx-900-rf-module-compatibility/38403)
**Author:** [@user122](https://forums.digi.com/u/user122)\ **Replies:** 3\ **Last updated:** [May 11, 2026, 12:51pm UTC](https://forums.digi.com/t/digi-xbee-lpx-900-rf-module-compatibility/38403 "2026-05-11T12:51:36Z")
In the Digi XBee LPX 900 RF Module specifications (specifically the Networking Topologies section), it mentions that it is “SX protocol compatible”. What is this referring too? Does this mean that it is compatible with t… --- ## [Digi XBee XR PRO compatibility with old Digi XBee 9XTend modules](https://forums.digi.com/t/digi-xbee-xr-pro-compatibility-with-old-digi-xbee-9xtend-modules/38405)
**Author:** [@pablov](https://forums.digi.com/u/pablov)\ **Replies:** 1\ **Last updated:** [May 11, 2026, 12:33pm UTC](https://forums.digi.com/t/digi-xbee-xr-pro-compatibility-with-old-digi-xbee-9xtend-modules/38405 "2026-05-11T12:33:40Z")
We have a legacy product using the Digi XBee 9XTend (PN: XT09-SI), we need to manufacture new units, we were looking into using the XBee Pro SX (PN: XBP9X-DMUS-001), which can be programmed with the XB9XT XTC hoppping fi… --- ## [XBee 900 XR broadcast problem](https://forums.digi.com/t/xbee-900-xr-broadcast-problem/38353)
**Author:** [@jonbhanson](https://forums.digi.com/u/jonbhanson)\ **Replies:** 6\ **Last updated:** [April 29, 2026, 1:11pm UTC](https://forums.digi.com/t/xbee-900-xr-broadcast-problem/38353 "2026-04-29T13:11:44Z")
I have a design that is working pretty well. The application is remote control, so I’m trying to keep things as close to real time as possible. I use unicast messages, and I observed that when I got to the edge of ran… --- ## [XCTU Range Test - exporting RSSI / PER results to CSV / showing run statistics?](https://forums.digi.com/t/xctu-range-test-exporting-rssi-per-results-to-csv-showing-run-statistics/38366)
**Author:** [@Gustavo](https://forums.digi.com/u/Gustavo)\ **Replies:** 1\ **Last updated:** [April 29, 2026, 1:08pm UTC](https://forums.digi.com/t/xctu-range-test-exporting-rssi-per-results-to-csv-showing-run-statistics/38366 "2026-04-29T13:08:55Z")
Hello, I’m running antenna A/B comparisons using the XCTU Tools → Range Test with Cluster ID 0x12 (Loopback) between two XBee-PRO 900HP modules (DigiMesh firmware). The Range Test tool itself is genuinely excellent; pai… [Next page](https://forums.digi.com/c/xbee-xbee-gateway/8.md?page=1)