# Latest **URL:** https://forums.digi.com/latest.md?page=1 [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) **Page:** 2 --- ## [How to update to 37.00.128 rev 2 on XB3-C-GM1-UT-001](https://forums.digi.com/t/how-to-update-to-37-00-128-rev-2-on-xb3-c-gm1-ut-001/38584)
**Author:** [@AthenaIndustrial](https://forums.digi.com/u/AthenaIndustrial)\ **Replies:** 7\ **Last updated:** [July 20, 2026, 11:48am UTC](https://forums.digi.com/t/how-to-update-to-37-00-128-rev-2-on-xb3-c-gm1-ut-001/38584 "2026-07-20T11:48:05Z")
We have 50 XB3-C-GM1-UT-001 radios that have been updated to the latest FW 11721 and Modem FW 37.00.128 (the latest xx8 release from Telit) With this release we are now able to use multi-provider sim cards, it works … --- ## [XB3-C-GM2-UT-001 Band support mismatch](https://forums.digi.com/t/xb3-c-gm2-ut-001-band-support-mismatch/38586)
**Author:** [@bevenson](https://forums.digi.com/u/bevenson)\ **Replies:** 5\ **Last updated:** [July 20, 2026, 11:44am UTC](https://forums.digi.com/t/xb3-c-gm2-ut-001-band-support-mismatch/38586 "2026-07-20T11:44:54Z")
According to the XB3-C-GM2-UT-001 specifications and user manual, this module should support the following cellular bands: LTE Bands: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B71, B85; … --- ## [Digi Remote Manager - "SESSION NOT INITIALIZED: Concurrent session limit reached" when connecting to ~100 devices via API](https://forums.digi.com/t/digi-remote-manager-session-not-initialized-concurrent-session-limit-reached-when-connecting-to-100-devices-via-api/38581)
**Author:** [@harsh\_98](https://forums.digi.com/u/harsh_98)\ **Replies:** 8\ **Last updated:** [July 15, 2026, 2:40pm UTC](https://forums.digi.com/t/digi-remote-manager-session-not-initialized-concurrent-session-limit-reached-when-connecting-to-100-devices-via-api/38581 "2026-07-15T14:40:37Z")
Digi Remote Manager - “SESSION NOT INITIALIZED: Concurrent session limit reached” when connecting to ~100 devices via API Hi everyone, We’re building our own platform that communicates with Digi-connected devices using … --- ## [Anyone have any experience connecting a PC to Allen Bradley Micrologix 1500 through a DigiOne IAP?](https://forums.digi.com/t/anyone-have-any-experience-connecting-a-pc-to-allen-bradley-micrologix-1500-through-a-digione-iap/19868)
**Author:** [@Dick\_Tanner](https://forums.digi.com/u/Dick_Tanner)\ **Replies:** 3\ **Last updated:** [July 11, 2026, 12:52pm UTC](https://forums.digi.com/t/anyone-have-any-experience-connecting-a-pc-to-allen-bradley-micrologix-1500-through-a-digione-iap/19868 "2026-07-11T12:52:49Z")
Trying to communicate with a Micrologix 1500 Allen Bradley PLC through a Digione IAP. Using Document # 90000650, DF1 Peer to peer and having no success. Any suggestions? --- ## [ATHS lookup table?](https://forums.digi.com/t/aths-lookup-table/38544)
**Author:** [@bevenson](https://forums.digi.com/u/bevenson)\ **Replies:** 2\ **Last updated:** [July 2, 2026, 1:32pm UTC](https://forums.digi.com/t/aths-lookup-table/38544 "2026-07-02T13:32:16Z")
We have a mix of the legacy XB3-C-A2-UT-001 and the current XB3-C-GM2-UT-001 deployed in the field. I’m trying to identify which is which for a site with AT commands. I don’t see any AT command that reports this version … --- ## [Python Configuration file](https://forums.digi.com/t/python-configuration-file/19562)
**Author:** [@cainxalakev](https://forums.digi.com/u/cainxalakev)\ **Replies:** 9\ **Last updated:** [July 2, 2026, 10:09am UTC](https://forums.digi.com/t/python-configuration-file/19562 "2026-07-02T10:09:32Z")
Hi! I’m trying to get the python configuration source code from the python page of the web app and I’m not sure how to do it. Any help would be greatly appreciated. --- ## [900HP DigiMesh: local AT unresponsive + reverse RREQ flooding under concurrent load — recover without a reset?](https://forums.digi.com/t/900hp-digimesh-local-at-unresponsive-reverse-rreq-flooding-under-concurrent-load-recover-without-a-reset/38534)
**Author:** [@hlyu-coencorp.com](https://forums.digi.com/u/hlyu-coencorp.com)\ **Replies:** 1\ **Last updated:** [June 29, 2026, 12:22pm UTC](https://forums.digi.com/t/900hp-digimesh-local-at-unresponsive-reverse-rreq-flooding-under-concurrent-load-recover-without-a-reset/38534 "2026-06-29T12:22:25Z")
Module: XBee-PRO 900HP, firmware VR=0x8075, DigiMesh, API mode, host MCU on UART. Setup: one mains-powered sink (host MCU + 900HP) and up to 11 battery “leaf” nodes that are powered FULLY OFF between uses (not DigiMesh… --- ## [Can CCMP25 VDDIO be set to 1.8V?](https://forums.digi.com/t/can-ccmp25-vddio-be-set-to-1-8v/38535)
**Author:** [@FvM](https://forums.digi.com/u/FvM)\ **Replies:** 0\ **Last updated:** [June 19, 2026, 4:29pm UTC](https://forums.digi.com/t/can-ccmp25-vddio-be-set-to-1-8v/38535 "2026-06-19T16:29:19Z")
Hello, CCMP25 SoM has VDDIO regularly set to 3.3V. We want to use the module as replacement in a system with 1.8V VDDIO. My question is if on-module usage of VDDIO (STPMIC25 BUCK4 output) will be compatible with this se… --- ## [X-linux-ai on CCMP25 dev kit](https://forums.digi.com/t/x-linux-ai-on-ccmp25-dev-kit/38513)
**Author:** [@jcdeka](https://forums.digi.com/u/jcdeka)\ **Replies:** 5\ **Last updated:** [June 16, 2026, 4:25pm UTC](https://forums.digi.com/t/x-linux-ai-on-ccmp25-dev-kit/38513 "2026-06-16T16:25:27Z")
Has anyone been able to run the “x-linux-ai” tool on DEY-5.0? The instructions for the MP255 dev kit here: X-LINUX-AI machine learning framework | ConnectCore MP25 do not work for me. It says to add this layer: bitbak… --- ## [ConnectCore MP25 Yocto build fails](https://forums.digi.com/t/connectcore-mp25-yocto-build-fails/38236)
**Author:** [@arhe](https://forums.digi.com/u/arhe)\ **Replies:** 6\ **Last updated:** [June 16, 2026, 8:36am UTC](https://forums.digi.com/t/connectcore-mp25-yocto-build-fails/38236 "2026-06-16T08:36:32Z")
I have followed the instructions for native Linux. Current DEY-5.0 (scarthgap branch) in use, no changes. Build (all image types) fails on “No IMAGE\_CMD defined for IMAGE\_FSTYPES entry ‘stsplitpartitions’ “ ERROR: /… --- ## [MAC OS Warning Intel](https://forums.digi.com/t/mac-os-warning-intel/38508)
**Author:** [@Zaemo](https://forums.digi.com/u/Zaemo)\ **Replies:** 5\ **Last updated:** [June 10, 2026, 11:53am UTC](https://forums.digi.com/t/mac-os-warning-intel/38508 "2026-06-10T11:53:53Z")
I get a warning when I open XCTU on my MacBook Pro with M1 processor. It states that XCTU may no longer run on non-Intel machines. Will there be some kind of rebuild to address this? Thank you, Z --- ## [What voltage is required for the Digi XBee SX 900 to transmit at its full 1 W power output?](https://forums.digi.com/t/what-voltage-is-required-for-the-digi-xbee-sx-900-to-transmit-at-its-full-1-w-power-output/38511)
**Author:** [@koffan](https://forums.digi.com/u/koffan)\ **Replies:** 2\ **Last updated:** [June 5, 2026, 1:10pm UTC](https://forums.digi.com/t/what-voltage-is-required-for-the-digi-xbee-sx-900-to-transmit-at-its-full-1-w-power-output/38511 "2026-06-05T13:10:11Z")
The Digi XBee SX 900 datasheet specifies a 3.3 V supply voltage and states that the module can transmit at up to 1 W output power. However, the PL parameter description in XCTU indicates that a supply voltage of 5 V or h… --- ## [Kernel panic and Bluetooth degradation on ConnectCore MP25 (DEY Yocto)](https://forums.digi.com/t/kernel-panic-and-bluetooth-degradation-on-connectcore-mp25-dey-yocto/38294)
**Author:** [@ASN](https://forums.digi.com/u/ASN)\ **Replies:** 8\ **Last updated:** [June 4, 2026, 12:54pm UTC](https://forums.digi.com/t/kernel-panic-and-bluetooth-degradation-on-connectcore-mp25-dey-yocto/38294 "2026-06-04T12:54:22Z")
Hello, I am working with the Digi Embedded Yocto distribution on a ConnectCore MP25 platform, following the official tutorial: Install Digi Embedded Yocto | ConnectCore MP25 The system is based on the dey-image-webkit … --- ## [XBee 3 LTE-M/NB-IoT: MAIN.PY wont respond to SMS when in AP=0 Transparent Mode](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-main-py-wont-respond-to-sms-when-in-ap-0-transparent-mode/38470)
**Author:** [@jackson](https://forums.digi.com/u/jackson)\ **Replies:** 8\ **Last updated:** [June 2, 2026, 2:13pm UTC](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-main-py-wont-respond-to-sms-when-in-ap-0-transparent-mode/38470 "2026-06-02T14:13:41Z")
XBee 3 LTE-M/NB-IoT cellular module. Using XBee Studio and the Xbee TH Dev Kit board. PS=1 MicroPython Auto-Start enabled Main.py executes fine when in AP=4 MicroPython REPL mode. The module responds correctly to a “… --- ## [New Connect ME 9210 -C modules won't run our image.bin application!](https://forums.digi.com/t/new-connect-me-9210-c-modules-wont-run-our-image-bin-application/26643)
**Author:** [@wtech](https://forums.digi.com/u/wtech)\ **Replies:** 13\ **Last updated:** [June 1, 2026, 1:53pm UTC](https://forums.digi.com/t/new-connect-me-9210-c-modules-wont-run-our-image-bin-application/26643 "2026-06-01T13:53:49Z")
What’s broken with the latest Connect ME 9210 -C modules (DC-ME-Y402-C )? I used the default factory ftp server application to load our image.bin. The file was accepted and appears to have been programmed into flash. Bu… --- ## [FXMC USB Neural Network Controller 3.0 flapping on AnywhereUSB 8 Plus](https://forums.digi.com/t/fxmc-usb-neural-network-controller-3-0-flapping-on-anywhereusb-8-plus/38491)
**Author:** [@AudriusJ](https://forums.digi.com/u/AudriusJ)\ **Replies:** 6\ **Last updated:** [June 1, 2026, 6:15am UTC](https://forums.digi.com/t/fxmc-usb-neural-network-controller-3-0-flapping-on-anywhereusb-8-plus/38491 "2026-06-01T06:15:01Z")
Hello everyone, I have an license dongle witch appear as “FXMC USB Neural Network Controller 3.0” in device manager and want it to provide in VMware virtual machine on our cluster. If I plug it directly in to host and f… --- ## [DigiMesh 900HP: leaf→sink unicast routes through a relay fine, but sink→leaf unicast fails \`0x01\` (MAC ACK fail) — sink attempts direct delivery instead of routing through the same relay. Why?](https://forums.digi.com/t/digimesh-900hp-leaf-sink-unicast-routes-through-a-relay-fine-but-sink-leaf-unicast-fails-0x01-mac-ack-fail-sink-attempts-direct-delivery-instead-of-routing-through-the-same-relay-why/38492)
**Author:** [@hlyu-coencorp.com](https://forums.digi.com/u/hlyu-coencorp.com)\ **Replies:** 2\ **Last updated:** [May 29, 2026, 5:56pm UTC](https://forums.digi.com/t/digimesh-900hp-leaf-sink-unicast-routes-through-a-relay-fine-but-sink-leaf-unicast-fails-0x01-mac-ack-fail-sink-attempts-direct-delivery-instead-of-routing-through-the-same-relay-why/38492 "2026-05-29T17:56:09Z")
Hi all, I have a 3-node DigiMesh network where the forward direction routes through an intermediate correctly, but the reverse direction will not — the sink keeps attempting a direct (single-hop) delivery to an out-of-r… --- ## [Edgeport1 9 databit](https://forums.digi.com/t/edgeport1-9-databit/38289)
**Author:** [@Jr1](https://forums.digi.com/u/Jr1)\ **Replies:** 2\ **Last updated:** [May 29, 2026, 3:12pm UTC](https://forums.digi.com/t/edgeport1-9-databit/38289 "2026-05-29T15:12:39Z")
Hello All , I’m looking for a solution so receive rs232 frames, using 9N1 format. Is it posible to run a communication in Linux and setup the edgeport1 ? Thanks a lot Jr1 --- ## [\[Custom Board\] CC-WST-J17D-NK – MEMS microphones not working: no clock generated, empty recording (DTS/Yocto)](https://forums.digi.com/t/custom-board-cc-wst-j17d-nk-mems-microphones-not-working-no-clock-generated-empty-recording-dts-yocto/38398)
**Author:** [@Philippe\_Fouquet](https://forums.digi.com/u/Philippe_Fouquet)\ **Replies:** 3\ **Last updated:** [May 29, 2026, 11:41am UTC](https://forums.digi.com/t/custom-board-cc-wst-j17d-nk-mems-microphones-not-working-no-clock-generated-empty-recording-dts-yocto/38398 "2026-05-29T11:41:10Z")
Hi, I developed a custom board for a CC-WST-J17D-NK module. Everything works fine except for the MEMS microphones. I connected two microphones (CMM-4030DT-261280-TR) to the module: CLOCK to D1 and DATA to D0 (configure… --- ## [Footprints and symbols for the Xbee RR module (SMA antenna, and others?)](https://forums.digi.com/t/footprints-and-symbols-for-the-xbee-rr-module-sma-antenna-and-others/38494)
**Author:** [@Ryanumass](https://forums.digi.com/u/Ryanumass)\ **Replies:** 1\ **Last updated:** [May 28, 2026, 3:58pm UTC](https://forums.digi.com/t/footprints-and-symbols-for-the-xbee-rr-module-sma-antenna-and-others/38494 "2026-05-28T15:58:31Z")
Is there anywhere to get footprints and symbols for the Xbee RR? it’s an important component in a design and files on it have been very hard to come by. --- ## [XBee-PRO 900HP / S3B — 0x10 Tx Request fails when Tx Options bit 0x80 (Trace Route) is set; works fine without it](https://forums.digi.com/t/xbee-pro-900hp-s3b-0x10-tx-request-fails-when-tx-options-bit-0x80-trace-route-is-set-works-fine-without-it/38482)
**Author:** [@hlyu-coencorp.com](https://forums.digi.com/u/hlyu-coencorp.com)\ **Replies:** 1\ **Last updated:** [May 28, 2026, 12:17pm UTC](https://forums.digi.com/t/xbee-pro-900hp-s3b-0x10-tx-request-fails-when-tx-options-bit-0x80-trace-route-is-set-works-fine-without-it/38482 "2026-05-28T12:17:12Z")
Hi all, I’m building a custom firmware for a HCS08-based host that drives an XBee-PRO 900HP (S3B) over UART in API mode (AP=1). The module runs DigiMesh firmware. Unicast packets work normally until I enable Trace Rout… --- ## [Digi board cc-sb-wmx-kk8d](https://forums.digi.com/t/digi-board-cc-sb-wmx-kk8d/38493)
**Author:** [@sarvesh.ghorpade](https://forums.digi.com/u/sarvesh.ghorpade)\ **Replies:** 0\ **Last updated:** [May 28, 2026, 11:37am UTC](https://forums.digi.com/t/digi-board-cc-sb-wmx-kk8d/38493 "2026-05-28T11:37:06Z")
Dear Community We are currently using Digi Board CC-SB-WMX-KK8D, and having issues with the screen flickering(touch screen), when the screen is operated the flickering is observed dramatically. Does anyone face the same… --- ## [AnywhereUSB Manager double connection](https://forums.digi.com/t/anywhereusb-manager-double-connection/38397)
**Author:** [@mlugli](https://forums.digi.com/u/mlugli)\ **Replies:** 4\ **Last updated:** [May 27, 2026, 9:22pm UTC](https://forums.digi.com/t/anywhereusb-manager-double-connection/38397 "2026-05-27T21:22:58Z")
This is a constructive feedback about our issues with the AnywhereUSB 2 Plus device and AnywhereUSB Manager software. The latter is installed as a service in a Windows Server virtual machine for connecting to a remote GN… --- ## [Problema con módems digi ix20](https://forums.digi.com/t/problema-con-modems-digi-ix20/38404)
**Author:** [@Johnysoto](https://forums.digi.com/u/Johnysoto)\ **Replies:** 4\ **Last updated:** [May 26, 2026, 9:26pm UTC](https://forums.digi.com/t/problema-con-modems-digi-ix20/38404 "2026-05-26T21:26:30Z")
Hola, tengo un Digi IX20 conectado por RS232 a un medidor sl7000 itron. El router tiene conectividad y responde ping. Con Hércules puedo abrir el puerto TCP, pero el software no recibe datos del medidor. --- ## [No modem detected TX54](https://forums.digi.com/t/no-modem-detected-tx54/38411)
**Author:** [@Tam](https://forums.digi.com/u/Tam)\ **Replies:** 7\ **Last updated:** [May 26, 2026, 9:11pm UTC](https://forums.digi.com/t/no-modem-detected-tx54/38411 "2026-05-26T21:11:46Z")
Issue with TX54 not connecting to internet, firmware i 24.6.17.69 , the model is Digi TX54-Dual-Cellular, SKU in the web interface is showing WR54-A246. This modem has been working until recently. In status/Modems its s… --- ## [WR54 internet connection issue](https://forums.digi.com/t/wr54-internet-connection-issue/38409)
**Author:** [@Tam](https://forums.digi.com/u/Tam)\ **Replies:** 6\ **Last updated:** [May 26, 2026, 9:09pm UTC](https://forums.digi.com/t/wr54-internet-connection-issue/38409 "2026-05-26T21:09:23Z")
Hi, I am having this issue on a few Digi WR54 cannot connect to the internet, digi logs showing message name server cannot be used temporary failure in name resolution. (-3) The name server 8.8.8.8 is assigned automatica… --- ## [AnywhereUSB 2 plus renaomly stops communicating](https://forums.digi.com/t/anywhereusb-2-plus-renaomly-stops-communicating/38431)
**Author:** [@RCDAWebmaster](https://forums.digi.com/u/RCDAWebmaster)\ **Replies:** 1\ **Last updated:** [May 26, 2026, 9:03pm UTC](https://forums.digi.com/t/anywhereusb-2-plus-renaomly-stops-communicating/38431 "2026-05-26T21:03:56Z")
I have a virtual windows server 2025 that connects to the anywhereUSB 2 plus device via the network. Connected to the AnywhereUSB 2 plus device is a Kantech USB-485. The Kantech device connects the door controllers of ou… --- ## [Custom Libraries](https://forums.digi.com/t/custom-libraries/38469)
**Author:** [@3lionsCT](https://forums.digi.com/u/3lionsCT)\ **Replies:** 2\ **Last updated:** [May 22, 2026, 5:49pm UTC](https://forums.digi.com/t/custom-libraries/38469 "2026-05-22T17:49:06Z")
Hi, I would like to develop my own custom libraries. Each project I develop will have a subdirectory with the custom libraries it needs to run that project. I know that you can point to this location in the LIB.DIR file… --- ## [What is the most stable firmware option for Rabbit 3000?](https://forums.digi.com/t/what-is-the-most-stable-firmware-option-for-rabbit-3000/38465)
**Author:** [@alvinandrea329](https://forums.digi.com/u/alvinandrea329)\ **Replies:** 1\ **Last updated:** [May 22, 2026, 4:07pm UTC](https://forums.digi.com/t/what-is-the-most-stable-firmware-option-for-rabbit-3000/38465 "2026-05-22T16:07:03Z")
Which Dynamic C version or codebase is best for a Rabbit 3000 project? --- ## [XBee 3 LTE-M/NB-IoT: Reading module AP setting causes outbound TCP conenction to open](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-reading-module-ap-setting-causes-outbound-tcp-conenction-to-open/38468)
**Author:** [@jackson](https://forums.digi.com/u/jackson)\ **Replies:** 6\ **Last updated:** [May 22, 2026, 1:10pm UTC](https://forums.digi.com/t/xbee-3-lte-m-nb-iot-reading-module-ap-setting-causes-outbound-tcp-conenction-to-open/38468 "2026-05-22T13:10:24Z")
XBee 3 LTE-M/NB-IoT cellular module. Using XBee Studio and the Xbee TH Dev Kit. DL=98.122.42.xxx Dest IP OD=0.0.0.0 Operating dest IP DE=50 Dest port C0=51 Listen port AP=0 Transparent mode PS=0 Micropy… [Previous page](https://forums.digi.com/latest.md) [Next page](https://forums.digi.com/latest.md?page=2)