# A couple of key features of the ConnectPort X2e

**URL:** <https://forums.digi.com/t/a-couple-of-key-features-of-the-connectport-x2e/11356>\
**Category:** Linux-based Gateways\
**Created:** [September 29, 2011, 7:14pm UTC](https://forums.digi.com/t/a-couple-of-key-features-of-the-connectport-x2e/11356 "2011-09-29T19:14:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![charliek](https://avatars.discourse-cdn.com/v4/letter/c/94ad74/32.png) [@charliek](https://forums.digi.com/u/charliek)\
**Post date:** [September 29, 2011, 7:14pm UTC](https://forums.digi.com/t/a-couple-of-key-features-of-the-connectport-x2e/11356/1 "2011-09-29T19:14:12Z")

</div>

I thought it might be good to mention a few things about the ConnectPort X2e:

- There is no telnet functionality built into the ConnectPort X2e
- The Web UI is disabled by default, a press of the white button on the front of the unit will enable it for the next 5 minutes
- The device is discoverable using the Digi Device Discovery tool, but can not be configured unless the white button is pressed on the front of the unit
- Devices running the 3.0.0.94 firmware by default point to [my.idigi.com](http://my.idigi.com), devices running 3.0.0.93 by default point to [developer.idigi.com](http://developer.idigi.com). Updating the firmware alone will not change which hostname the device tries to connect to, a factory default is needed (or a reconfiguration)