# Access EtherLite 32 from Windows XP and Tru64 Unix

**URL:** <https://forums.digi.com/t/access-etherlite-32-from-windows-xp-and-tru64-unix/7142>\
**Category:** Realport\
**Created:** [May 31, 2007, 2:29am UTC](https://forums.digi.com/t/access-etherlite-32-from-windows-xp-and-tru64-unix/7142 "2007-05-31T02:29:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![wfchu](https://avatars.discourse-cdn.com/v4/letter/w/9fc29f/32.png) [@wfchu](https://forums.digi.com/u/wfchu)\
**Post date:** [May 31, 2007, 2:29am UTC](https://forums.digi.com/t/access-etherlite-32-from-windows-xp-and-tru64-unix/7142/1 "2007-05-31T02:29:46Z")

</div>

Hi,

I’ve few Etherlite32 installed in Tru64 Unix environment, I would like to know if those TSs can also be accessed by Widnow servers as well. I understand the firmware used is different in each environment.

Many thanks.

Regards,  
WF Chu

---

<div class="post-metadata">

**Author:** ![michaelt](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/michaelt/32/92_2.png) [@michaelt](https://forums.digi.com/u/michaelt)\
**Post date:** [May 31, 2007, 2:49pm UTC](https://forums.digi.com/t/access-etherlite-32-from-windows-xp-and-tru64-unix/7142/2 "2007-05-31T14:49:34Z")

</div>

The only firmware supported for the Etherlites by Digi is the Realport firmware.

A Realport driver exists for Windows XP, but you would have to load Realport firmware on your Etherlite for the driver to work with it.

As for Tru64, a Realport driver did exist at one time, but due to a serious panic issue with that driver and the fact that we’ve end-of-lifed support for the operating system itself, a “fix” was never released and the problem driver is no longer offered to our customers.