# Adding Route and IP Tables

**URL:** <https://forums.digi.com/t/adding-route-and-ip-tables/5885>\
**Category:** NET+OS\
**Created:** [June 20, 2012, 9:32am UTC](https://forums.digi.com/t/adding-route-and-ip-tables/5885 "2012-06-20T09:32:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarcRene](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@MarcRene](https://forums.digi.com/u/MarcRene)\
**Post date:** [June 20, 2012, 9:32am UTC](https://forums.digi.com/t/adding-route-and-ip-tables/5885/1 "2012-06-20T09:32:06Z")

</div>

In NET+OS 7 API Reference I can’t find information on adding static routes or using IP Tables in TRECK IP stack, only PPPAddStaticRoute() for serial PPP interfaces. Where can I find these informations and/or work-arounds to manipulate IP routing?  
Thanks for any hints [:D]

---

<div class="post-metadata">

**Author:** ![dakotas\_dad](https://avatars.discourse-cdn.com/v4/letter/d/a88e57/32.png) [@dakotas\_dad](https://forums.digi.com/u/dakotas_dad)\
**Post date:** [October 9, 2012, 7:44pm UTC](https://forums.digi.com/t/adding-route-and-ip-tables/5885/2 "2012-10-09T19:44:51Z")

</div>

NET+OS does not contain any APIs for manipulating the routing tables. A default route (gateway) is set up at device startup and that remains the route of choice.