# Adjust virtual directories displayed in Digi Remote Manager

**URL:** <https://forums.digi.com/t/adjust-virtual-directories-displayed-in-digi-remote-manager/25427>\
**Category:** Connect EZ\
**Tags:** remote-manager\
**Created:** [May 10, 2023, 3:43pm UTC](https://forums.digi.com/t/adjust-virtual-directories-displayed-in-digi-remote-manager/25427 "2023-05-10T15:43:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![velosol](https://avatars.discourse-cdn.com/v4/letter/v/f05b48/32.png) [@velosol](https://forums.digi.com/u/velosol)\
**Post date:** [May 10, 2023, 3:43pm UTC](https://forums.digi.com/t/adjust-virtual-directories-displayed-in-digi-remote-manager/25427/1 "2023-05-10T15:43:21Z")

</div>

The ‘Files’ tab in Digi Remote Manager appears to use virtual directories.

Is it possible to adjust the virtual directory configuration?

![image](https://us1.discourse-cdn.com/flex016/uploads/digi/original/2X/1/15bd56beb89aa352870a93832863ec40eb985015.png)

And from a shell session:  
`# find . -name applications -type d`  
returns no output although it’s `/etc/config/scripts` by contents.

I did see the Digi Embedded Yocto docs [talk about accessing the file system](https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.2/cc6/yocto_t_rm-access-filesystem) but there’s no `/etc/cc.conf` on the file system and even if I were to add it I’m unsure how I’d go about setting it as a device configuration (I suppose an un-sandboxed run-once task could work?).

Device: Connect EZ4i on firmware 22.11.48.10

---

<div class="post-metadata">

**Author:** ![velosol](https://avatars.discourse-cdn.com/v4/letter/v/f05b48/32.png) [@velosol](https://forums.digi.com/u/velosol)\
**Post date:** [July 27, 2023, 7:49pm UTC](https://forums.digi.com/t/adjust-virtual-directories-displayed-in-digi-remote-manager/25427/3 "2023-07-27T19:49:42Z")

</div>

I ended up reaching out to Tech Support about a related issue (looking to get logfiles written to `/tmp` into the web UI) and the answer was that they didn’t support that request in particular and I assume that extends to adjusting the folders shown in the web UI.
