# Analog ports calibration on telemetry 2 card

**URL:** <https://forums.digi.com/t/analog-ports-calibration-on-telemetry-2-card/14221>\
**Category:** Digi TransPort WR (Series)\
**Tags:** calibration, transport, telemetry, analog\
**Created:** [January 21, 2015, 2:36pm UTC](https://forums.digi.com/t/analog-ports-calibration-on-telemetry-2-card/14221 "2015-01-21T14:36:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![fchavez14](https://avatars.discourse-cdn.com/v4/letter/f/eb8c5e/32.png) [@fchavez14](https://forums.digi.com/u/fchavez14)\
**Post date:** [January 21, 2015, 2:36pm UTC](https://forums.digi.com/t/analog-ports-calibration-on-telemetry-2-card/14221/1 "2015-01-21T14:36:39Z")

</div>

Does anyone know the right way to configure/use the analog ports of the telemetry2 card on a digi transport?  
I followed carefully all the steps of the telemetry2 user guide but the ports are not showing me the right reading.