# Any Digi Connect Wi-ME (-S) recovery methods?
**URL:** https://forums.digi.com/t/any-digi-connect-wi-me-s-recovery-methods/12360
**Category:** Plug N' Play
**Tags:** recovery, boot-menu
**Created:** [January 8, 2014, 8:11am UTC](https://forums.digi.com/t/any-digi-connect-wi-me-s-recovery-methods/12360 "2014-01-08T08:11:54Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@ptu](https://forums.digi.com/u/ptu)
#### Post date: [January 8, 2014, 8:11am UTC](https://forums.digi.com/t/any-digi-connect-wi-me-s-recovery-methods/12360/1 "2014-01-08T08:11:54Z")
I have some bricked Plug N’ Play (-S) Digi Connect Wi-ME modules blinking 8-1-1 with yellow led immediately after power up.
Is there any recovery methods for Plug N’ Play Wi-ME, like the pin18 boot menu in Plug N’ Play ME?
The pin18 method has been very successful in recovering corrupted blinking MEs, so I would like to try recovering these Wi-MEs, too.
---
### Author:  [@Campbell](https://forums.digi.com/u/Campbell)
#### Post date: [January 8, 2014, 1:28pm UTC](https://forums.digi.com/t/any-digi-connect-wi-me-s-recovery-methods/12360/2 "2014-01-08T13:28:37Z")
Hello, you should try the method outlined in this link:
ftp://ftp1.digi.com/support/images/connect/intkit/docs/Connect\_Mfg-DiagsMode.pdf
Hope this works.
---
### Author:  [@ptu](https://forums.digi.com/u/ptu)
#### Post date: [January 8, 2014, 11:36pm UTC](https://forums.digi.com/t/any-digi-connect-wi-me-s-recovery-methods/12360/3 "2014-01-08T23:36:24Z")
Thanks for that link. The method described in the document is actually “grounding the pin 18” for the Diagnostics Test menu, which I have already tried without success. ☹
But the document confirms that Wi-ME should have some kind of Diagnostics Test menu, too. (I was not sure if it is an ME-only feature.)