# Any restriction to vendor-Id or product-Id? **URL:** \ **Category:** USB\ **Created:** [July 1, 2024, 7:07pm UTC](https://forums.digi.com/t/any-restriction-to-vendor-id-or-product-id/31567 "2024-07-01T19:07:08Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![tstauffer](https://avatars.discourse-cdn.com/v4/letter/t/278dde/32.png) [@tstauffer](https://forums.digi.com/u/tstauffer)\ **Post date:** [July 1, 2024, 7:07pm UTC](https://forums.digi.com/t/any-restriction-to-vendor-id-or-product-id/31567/1 "2024-07-01T19:07:08Z")
Hello together, is it possible to configure specific USB vendor-id/product-ids with anywhereUSB devices ? Or is there no restriction regarding these IDs ? thanks for your support ! ---
**Author:** ![jmcbane](https://avatars.discourse-cdn.com/v4/letter/j/a6a055/32.png) [@jmcbane](https://forums.digi.com/u/jmcbane)\ **Post date:** [July 2, 2024, 5:17pm UTC](https://forums.digi.com/t/any-restriction-to-vendor-id-or-product-id/31567/2 "2024-07-02T17:17:32Z")
Hello, The older AnywhereUSB G2 family of products supports a feature called Permitted Devices: [https://www.digi.com/resources/documentation/DigiDocs/90001085/default.htm#reference/r\_app\_a\_anywhereusb\_permitted\_device\_list.htm%3FTocPath%3D\_\_\_\_\_14](https://www.digi.com/resources/documentation/DigiDocs/90001085/default.htm#reference/r_app_a_anywhereusb_permitted_device_list.htm%3FTocPath%3D _____ 14) At this time, the newer AnywhereUSB Plus family of products does not yet formally support such a feature, and it is being considered by product management. There is an undocumented workaround that you could try. From the device’s Admin CLI, issue the following command: > config service anywhereusb custom\_config “AllowedDevices=VID/PID,VID/PID,VID/PID” Where the actual VID/PID are 4 digit hex values, separated by commas (if needed). Note that a reboot of the AnywhereUSB Plus is required after this configuration change, and this requires that the AnywhereUSB Plus is running system firmware 20.11.x.x or newer.