# Anyone know a started guide for digimesh?

**URL:** <https://forums.digi.com/t/anyone-know-a-started-guide-for-digimesh/21209>\
**Category:** XBee - DigiMesh\
**Tags:** configuration, meshnetwork, digimesh\
**Created:** [March 23, 2020, 8:59am UTC](https://forums.digi.com/t/anyone-know-a-started-guide-for-digimesh/21209 "2020-03-23T08:59:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gomezramones](https://avatars.discourse-cdn.com/v4/letter/g/8edcca/32.png) [@gomezramones](https://forums.digi.com/u/gomezramones)\
**Post date:** [March 23, 2020, 8:59am UTC](https://forums.digi.com/t/anyone-know-a-started-guide-for-digimesh/21209/1 "2020-03-23T08:59:24Z")

</div>

I have looked up on the web to deepen more about digimesh and know how to implement it but I just found superficial information.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [March 23, 2020, 9:16am UTC](https://forums.digi.com/t/anyone-know-a-started-guide-for-digimesh/21209/2 "2020-03-23T09:16:27Z")

</div>

Gomezramones,

I don’t know which Digi Mesh module you have but one of the manuals can be found at [https://www.digi.com/resources/documentation/Digidocs/90002277/](https://www.digi.com/resources/documentation/Digidocs/90002277/)

In general, the addressing on Digi Mesh is 64 bit. So you use the Serial number as the Source address. When you want to send data to a specific module, you put its Serial number high and low in the DL and DH field of the sending unit.

Digi Support
