# AnywhereUSB/14 after reboot not responsible: blink code 2-3-2 red, 1 green... endless loop **URL:** \ **Category:** Realport\ **Tags:** anywhereusb14-system\ **Created:** [November 15, 2018, 11:57am UTC](https://forums.digi.com/t/anywhereusb-14-after-reboot-not-responsible-blink-code-2-3-2-red-1-green-endless-loop/20032 "2018-11-15T11:57:30Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![digirob](https://avatars.discourse-cdn.com/v4/letter/d/3da27b/32.png) [@digirob](https://forums.digi.com/u/digirob)\ **Post date:** [November 15, 2018, 11:57am UTC](https://forums.digi.com/t/anywhereusb-14-after-reboot-not-responsible-blink-code-2-3-2-red-1-green-endless-loop/20032/1 "2018-11-15T11:57:30Z")
AnywhereUSB/14 devices seems to be defective. Once the administrative page was very slow reachable a reboot was performed. After the reboot, the device is no longer reachable. The system status led has the following blink code: 1x long (2 sec) green 2x red 3x red 2x red and so on (endless loop) The warranty period has already expired. Nevertheless I ask for support from the Digi Technical Support, strictly speaking the question which electronic component could be defective and where replacement can be purchased. It would also be nice to know where in Germany a certified repair center is located. Thank you in advance for any advice and support. Rob ---
**Author:** ![sef](https://avatars.discourse-cdn.com/v4/letter/s/a4c791/32.png) [@sef](https://forums.digi.com/u/sef)\ **Post date:** [May 15, 2019, 4:31pm UTC](https://forums.digi.com/t/anywhereusb-14-after-reboot-not-responsible-blink-code-2-3-2-red-1-green-endless-loop/20032/2 "2019-05-15T16:31:56Z")
Good afternoon, today I faced the same problem. But the solutions also could not be found.