# AnywhereUSB 24 Plus auth via RADIUS with Cisco ISE

**URL:** <https://forums.digi.com/t/anywhereusb-24-plus-auth-via-radius-with-cisco-ise/22670>\
**Category:** Other & Legacy Products\
**Tags:** radius, anywhereusb, cisco\
**Created:** [September 17, 2021, 8:29am UTC](https://forums.digi.com/t/anywhereusb-24-plus-auth-via-radius-with-cisco-ise/22670 "2021-09-17T08:29:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tyurnikovea](https://avatars.discourse-cdn.com/v4/letter/t/7ba0ec/32.png) [@tyurnikovea](https://forums.digi.com/u/tyurnikovea)\
**Post date:** [September 17, 2021, 8:29am UTC](https://forums.digi.com/t/anywhereusb-24-plus-auth-via-radius-with-cisco-ise/22670/1 "2021-09-17T08:29:22Z")

</div>

We have buy AnywhereUSB 24 Plus and I try setting up auth via RADIUS protocol to Cisco ISE  
regarding procedure described on this page ([https://www.digi.com/support/knowledge-base/use-radius-for-device-administration-with-cisco-is](https://www.digi.com/support/knowledge-base/use-radius-for-device-administration-with-cisco-is))

all is ok, I’m login with my AD username and password, but can’t save config from web-page

From ssh all working. I can change configuration without any problem  
Please, say, in which can be problem?  
Thanks a lot!