# Application Layer Addressing

**URL:** <https://forums.digi.com/t/application-layer-addressing/2341>\
**Category:** XBee - Zigbee\
**Created:** [January 8, 2010, 3:03pm UTC](https://forums.digi.com/t/application-layer-addressing/2341 "2010-01-08T15:03:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jhetrick](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@jhetrick](https://forums.digi.com/u/jhetrick)\
**Post date:** [January 8, 2010, 3:03pm UTC](https://forums.digi.com/t/application-layer-addressing/2341/1 "2010-01-08T15:03:12Z")

</div>

Has anyone some examples of this in play? I’m currently playing with it via AT command set.

The 3 paragraphs in the 2.5 datasheet just isn’t quite enough to get me going.

Currently I’m testing with a coordinator attached to XTCU terminal and then dealing with an ZNet router/endpoint that’s attached to a micro.

The mesh consistes of 3 units (Coordinator, two RE’s). I’m just trying to workout what is sent to the RE if ATZA=1 on 2 units and have hard-looped one unit, but, nothing appears to be happening.

Can someone shed some light on how this is implemented and can be used?

Thanks,

Joe
