# are directions you linked for use w/ single end-point

**URL:** https://forums.digi.com/t/are-directions-you-linked-for-use-w-single-end-point/13353
**Category:** XBee - 802.15.4
**Tags:** xbee-network
**Created:** [July 22, 2014, 11:20pm UTC](https://forums.digi.com/t/are-directions-you-linked-for-use-w-single-end-point/13353 "2014-07-22T23:20:57Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![ClAIntegration](https://avatars.discourse-cdn.com/v4/letter/c/ebca7d/32.png) [@ClAIntegration](https://forums.digi.com/u/ClAIntegration)
#### Post date: [July 22, 2014, 11:20pm UTC](https://forums.digi.com/t/are-directions-you-linked-for-use-w-single-end-point/13353/1 "2014-07-22T23:20:57Z")

</div>

w/ 4 buttons or can they also be applied to 4 separate end-points w/ 1 button each?

---

<div class="post-metadata">

### Author: ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)
#### Post date: [August 4, 2014, 2:47pm UTC](https://forums.digi.com/t/are-directions-you-linked-for-use-w-single-end-point/13353/2 "2014-08-04T14:47:20Z")

</div>

If you set the DL and DH to the broadcast address of FFFF, then you can have the different DIO lines go to different remote modules.