# ARP

**URL:** <https://forums.digi.com/t/arp/5836>\
**Category:** NET+OS\
**Created:** [January 8, 2003, 12:28pm UTC](https://forums.digi.com/t/arp/5836 "2003-01-08T12:28:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![shatman](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@shatman](https://forums.digi.com/u/shatman)\
**Post date:** [January 8, 2003, 12:28pm UTC](https://forums.digi.com/t/arp/5836/1 "2003-01-08T12:28:38Z")

</div>

Can you access the ARP table or send ARP commands ?

---

<div class="post-metadata">

**Author:** ![muscleman](https://avatars.discourse-cdn.com/v4/letter/m/f1d935/32.png) [@muscleman](https://forums.digi.com/u/muscleman)\
**Post date:** [January 13, 2003, 6:46pm UTC](https://forums.digi.com/t/arp/5836/2 "2003-01-13T18:46:46Z")

</div>

ARP - Address resolution Protocol messages will be sent only if the host would like to find the physical address of a target host, given only that hosts IP address is known. NetArm target will respond to ARP requests and will send out ARP requests automatically - it is hard coded, can’t be accessed from the application calls.
