# AT commands for network working mode

**URL:** <https://forums.digi.com/t/at-commands-for-network-working-mode/16985>\
**Category:** XBee & XBee Gateway\
**Tags:** xbee\
**Created:** [June 23, 2016, 10:32pm UTC](https://forums.digi.com/t/at-commands-for-network-working-mode/16985 "2016-06-23T22:32:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DrDoggy](https://avatars.discourse-cdn.com/v4/letter/d/91b2a8/32.png) [@DrDoggy](https://forums.digi.com/u/DrDoggy)\
**Post date:** [June 23, 2016, 10:32pm UTC](https://forums.digi.com/t/at-commands-for-network-working-mode/16985/1 "2016-06-23T22:32:52Z")

</div>

Hi, I have xbee 52c when i load XCTU and click network working mode, then click scan, my radio is able to scan and detect all devices on pan network, although i went to the console and repeated the commands generated but not the response i want(maybe)

please explain how to do a pan scan using AT commands only in console without using network working mode

thanks!

---

<div class="post-metadata">

**Author:** ![csreddy](https://avatars.discourse-cdn.com/v4/letter/c/13edae/32.png) [@csreddy](https://forums.digi.com/u/csreddy)\
**Post date:** [June 24, 2016, 2:54am UTC](https://forums.digi.com/t/at-commands-for-network-working-mode/16985/2 "2016-06-24T02:54:37Z")

</div>

for to find out pan id for the module command is ATID

---

<div class="post-metadata">

**Author:** ![DrDoggy](https://avatars.discourse-cdn.com/v4/letter/d/91b2a8/32.png) [@DrDoggy](https://forums.digi.com/u/DrDoggy)\
**Post date:** [June 24, 2016, 4:22pm UTC](https://forums.digi.com/t/at-commands-for-network-working-mode/16985/3 "2016-06-24T16:22:43Z")

</div>

Yes, I set up the Pan , but then how do i scan it for modules,

ie there is a button at the top right of xctu that looks like a bunch of bubbles, inside there is a scan button , when i press it all my modules are seen in a spider web, I cant find anywhere how to execute the scan button with code (through console or at frame generator)