# AW24-G300 Ethernet network bonding

**URL:** <https://forums.digi.com/t/aw24-g300-ethernet-network-bonding/21431>\
**Category:** Edgeport\
**Tags:** usb, network, anywhereusb, bonding, plus\
**Created:** [June 5, 2020, 11:26am UTC](https://forums.digi.com/t/aw24-g300-ethernet-network-bonding/21431 "2020-06-05T11:26:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DTS-MDT](https://avatars.discourse-cdn.com/v4/letter/d/bc8723/32.png) [@DTS-MDT](https://forums.digi.com/u/DTS-MDT)\
**Post date:** [June 5, 2020, 11:26am UTC](https://forums.digi.com/t/aw24-g300-ethernet-network-bonding/21431/1 "2020-06-05T11:26:31Z")

</div>

The online doco below does not reflect the WebUI layout on our AW24-G300. ([https://www.digi.com/resources/documentation/digidocs/90002294/default.htm#tasks/t\_ethnert\_network\_bonding.htm%3FTocPath%3DAdministrators%253A%2520Configure%2520the%2520AnywhereUSB%25C2%25AE%2520Plus%2520in%2520the%2520web%2520user%2520interface|\_\_\_\_\_8](https://www.digi.com/resources/documentation/digidocs/90002294/default.htm#tasks/t_ethnert_network_bonding.htm%3FTocPath%3DAdministrators%253A%2520Configure%2520the%2520AnywhereUSB%25C2%25AE%2520Plus%2520in%2520the%2520web%2520user%2520interface%7C _____ 8))

To be more specific, i do not have the “Ethernet Network Configuration” dialogue.  
I do however have a “NETWORK \> INTERFACES \> ETH1” section under Configuration, but there are no “Bonding” options that I can see.  
Please note, I currently only have one NIC physically attached to the network at this point in time.

Where can I find current information on the procedure to enable “Network Bonding”?  
Cheers,  
Leon

---

<div class="post-metadata">

**Author:** ![Anny](https://avatars.discourse-cdn.com/v4/letter/a/71c47a/32.png) [@Anny](https://forums.digi.com/u/Anny)\
**Post date:** [June 8, 2020, 8:02am UTC](https://forums.digi.com/t/aw24-g300-ethernet-network-bonding/21431/2 "2020-06-08T08:02:18Z")

</div>

Hi and welcome to Digi Forum.

After the upgrade to the new DAL firmware 19.11.72.85 or later, the ETH behavior is changed and the bonding feature is not there anymore currently. There is a plan to implement this feature back in next months, or alternatively, there are other configuration options to obtain failover depending on your specific needs.

For any further help or questions on this subject, I would suggest you to send us an email to [tech.support@digi.com](mailto:tech.support@digi.com)

Best Regards

Anny  
Digi Technical Support Team

---

<div class="post-metadata">

**Author:** ![rominause](https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/32.png) [@rominause](https://forums.digi.com/u/rominause)\
**Post date:** [January 6, 2021, 8:34am UTC](https://forums.digi.com/t/aw24-g300-ethernet-network-bonding/21431/3 "2021-01-06T08:34:57Z")

</div>

Sounds nice!

---

<div class="post-metadata">

**Author:** ![Aleksey.I.Maksimov](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/aleksey.i.maksimov/32/1361_2.png) [@Aleksey.I.Maksimov](https://forums.digi.com/u/Aleksey.I.Maksimov)\
**Post date:** [October 11, 2021, 11:36am UTC](https://forums.digi.com/t/aw24-g300-ethernet-network-bonding/21431/4 "2021-10-11T11:36:27Z")

</div>

Hello.

I just tried setting up bonding on the current Firmware version 21.8.24.129 (09/13/2021) and it works.  
A description of the bonding setting in the Active-Backup mode with a specific example and with screenshots can be found here

[https://blog.it-kb.ru/2021/10/08/digi-anywhereusb-24-plus-configuring-ethernet-network-bonding-in-active-backup-mode/](https://blog.it-kb.ru/2021/10/08/digi-anywhereusb-24-plus-configuring-ethernet-network-bonding-in-active-backup-mode/)