# baud rate problem **URL:** \ **Category:** XBee - Point-to-Point/Multi-Point\ **Created:** [May 15, 2011, 10:05pm UTC](https://forums.digi.com/t/baud-rate-problem/2026 "2011-05-15T22:05:57Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Gaston](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@Gaston](https://forums.digi.com/u/Gaston)\ **Post date:** [May 15, 2011, 10:05pm UTC](https://forums.digi.com/t/baud-rate-problem/2026/1 "2011-05-15T22:05:57Z")
Hi to All, Accidently I set the baud rate at 115200 and now I can’t connect to the xbee. How can I know the new baud rate, to be able to restore the original 9600?? ---
**Author:** ![Gaston](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@Gaston](https://forums.digi.com/u/Gaston)\ **Post date:** [May 16, 2011, 2:03am UTC](https://forums.digi.com/t/baud-rate-problem/2026/2 "2011-05-16T02:03:47Z")
I have an Xbee-PRO XSC module, I downloaded the X-CTU program to be able to choose differents baud rates, but still I don’t know which is the baud rates of the Xbee. I tried the hardware reset (by applying low level in the reset pin), but it doesn’t work. How can I know what is the baud rate of the Xbee? ---
**Author:** ![Gaston](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@Gaston](https://forums.digi.com/u/Gaston)\ **Post date:** [May 16, 2011, 1:28pm UTC](https://forums.digi.com/t/baud-rate-problem/2026/3 "2011-05-16T13:28:36Z")
I answer to myself (strange thing in a FORUM), I solve it!!! ---
**Author:** ![Gaston](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@Gaston](https://forums.digi.com/u/Gaston)\ **Post date:** [May 16, 2011, 2:31pm UTC](https://forums.digi.com/t/baud-rate-problem/2026/4 "2011-05-16T14:31:00Z")
The Xbee was stuck in 7100 baud , I scanned the baud rate using X-CTU program. Then the X-CTU restored it to default values. Best Regards