# BL2600 example program

**URL:** <https://forums.digi.com/t/bl2600-example-program/10969>\
**Category:** Rabbit\
**Created:** [August 13, 2010, 2:18pm UTC](https://forums.digi.com/t/bl2600-example-program/10969 "2010-08-13T14:18:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![franklussier](https://avatars.discourse-cdn.com/v4/letter/f/439d5e/32.png) [@franklussier](https://forums.digi.com/u/franklussier)\
**Post date:** [August 13, 2010, 2:18pm UTC](https://forums.digi.com/t/bl2600-example-program/10969/1 "2010-08-13T14:18:46Z")

</div>

Hi, I looked through the sample program and application notes and can’t find what i am looking for.  
What I am trying to do is read the temperature from analog input and display on a web page, I have 4 temp sensors and 1 water level (the sensor is a linear potentiometer) and I need a setup page for activating digiout if the temp goes higher or lower the set point, the setting needs to be saved in a user block .

I am new to dynamic c and need help  
Is anybody able to help with a sample program, it will be well appreciated.

Thanks  
Frank

I have BL2600, RN1200