# BL4S100 Xbee Problem

**URL:** <https://forums.digi.com/t/bl4s100-xbee-problem/9753>\
**Category:** Rabbit\
**Created:** [March 31, 2011, 6:03pm UTC](https://forums.digi.com/t/bl4s100-xbee-problem/9753 "2011-03-31T18:03:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![chanchungfat](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@chanchungfat](https://forums.digi.com/u/chanchungfat)\
**Post date:** [March 31, 2011, 6:03pm UTC](https://forums.digi.com/t/bl4s100-xbee-problem/9753/1 "2011-03-31T18:03:01Z")

</div>

I try to change the mode from ROUTER to COORD using the program modemFWload. After it is done, I always find an error message " xbee\_init failed. result code: -5 (I/O error) " while trying to run other programs.

I notice the DS1 LED from the Assoc pin is off. Its on before I run program modemFWload.

I am using DC10.64.

Anything I’ve done wrong?
