# BL4S200 ERROR BOARDTYPES.LIB

**URL:** <https://forums.digi.com/t/bl4s200-error-boardtypes-lib/15206>\
**Category:** Rabbit Software\
**Tags:** c, bl4s200, dynamic, 10, 72\
**Created:** [July 31, 2015, 9:57am UTC](https://forums.digi.com/t/bl4s200-error-boardtypes-lib/15206 "2015-07-31T09:57:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pacovwc10](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@pacovwc10](https://forums.digi.com/u/pacovwc10)\
**Post date:** [July 31, 2015, 9:57am UTC](https://forums.digi.com/t/bl4s200-error-boardtypes-lib/15206/1 "2015-07-31T09:57:42Z")

</div>

Hi Digi Team,

We’re using a BL4S200 and today we’re trying to compile and run a program (using F9 or Compile -\> Compile to Target -\>Store Program in Flash) and we got these error messages:

line 27 : ERROR BOARDTYPES.LIB : No ID Block found on the target board.  
line 28 : ERROR BOARDTYPES.LIB : Please contact Rabbit Technical Support at [http://www.digi.com/support](http://www.digi.com/support) for assistance.

line 1 : WARNING ERROR : This version of Dynamic C only supports up to system macro table version 0.  
line 27 : ERROR BOARDTYPES.LIB : No ID Block found on the target board.  
line 28 : ERROR BOARDTYPES.LIB : Please contact Rabbit Technical Support at [http://www.digi.com/support](http://www.digi.com/support) for assistance.

Do you know what can cause these errors?

Best Regards,  
Francisco

---

<div class="post-metadata">

**Author:** ![Campbell](https://avatars.discourse-cdn.com/v4/letter/c/97f17d/32.png) [@Campbell](https://forums.digi.com/u/Campbell)\
**Post date:** [September 10, 2015, 3:02pm UTC](https://forums.digi.com/t/bl4s200-error-boardtypes-lib/15206/2 "2015-09-10T15:02:44Z")

</div>

For some reason your BL4S200 has a missing or corrupted ID Block.  
To rewrite the ID block, see this link Download Rabbit - Write ID Block 10.70 which is under General Documentation, [Your text to link here…](http://ftp1.digi.com/support/documentation/WriteIdBlock_1070.zip) Unzip the file into the Dynamic C directory. Then go to the Utilities\Write\_ID folder and open write\_idblock\_blxs2xx.c. Follow the instructions at the top of the file for the BL4S200.

---

<div class="post-metadata">

**Author:** ![pacovwc10](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@pacovwc10](https://forums.digi.com/u/pacovwc10)\
**Post date:** [September 22, 2015, 1:58pm UTC](https://forums.digi.com/t/bl4s200-error-boardtypes-lib/15206/3 "2015-09-22T13:58:51Z")

</div>

It worked OK !  
🙂  
Thank you very much,  
Francisco