# Can I add a static DHCP lease from the CLI?

**URL:** https://forums.digi.com/t/can-i-add-a-static-dhcp-lease-from-the-cli/18887
**Category:** Digi TransPort WR (Series)
**Tags:** dhcp, cli, wr11
**Created:** [November 7, 2017, 4:12pm UTC](https://forums.digi.com/t/can-i-add-a-static-dhcp-lease-from-the-cli/18887 "2017-11-07T16:12:21Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![SuicidalLabRat](https://avatars.discourse-cdn.com/v4/letter/s/54ee81/32.png) [@SuicidalLabRat](https://forums.digi.com/u/SuicidalLabRat)
#### Post date: [November 7, 2017, 4:12pm UTC](https://forums.digi.com/t/can-i-add-a-static-dhcp-lease-from-the-cli/18887/1 "2017-11-07T16:12:21Z")

</div>

We have a fleet of WR11’s in the field that need additional device MAC addresses added to their DHCP static lease tables. We have remote access to the units and are hoping to remotely make additions to the static lease table via the cli. Is this possible? If so, might you point me to where the appropriate commands are documented?

---

<div class="post-metadata">

### Author: ![James.Wilson](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@James.Wilson](https://forums.digi.com/u/James.Wilson)
#### Post date: [November 8, 2017, 3:39am UTC](https://forums.digi.com/t/can-i-add-a-static-dhcp-lease-from-the-cli/18887/2 "2017-11-08T03:39:40Z")

</div>

Hi

User manual

[https://www.digi.com/resources/documentation/Digidocs/pdfs/90001019.pdf](https://www.digi.com/resources/documentation/Digidocs/pdfs/90001019.pdf)

page 343

mac2ip mac  
mac2ip IPaddr

if you have some already assigned you should be able to follow them

regards

James