# Can I create a digimesh network replacing xbee grove development board with arduinos?

**URL:** <https://forums.digi.com/t/can-i-create-a-digimesh-network-replacing-xbee-grove-development-board-with-arduinos/20238>\
**Category:** XBee - DigiMesh\
**Tags:** arduino-xbee, digimesh\
**Created:** [February 7, 2019, 1:23pm UTC](https://forums.digi.com/t/can-i-create-a-digimesh-network-replacing-xbee-grove-development-board-with-arduinos/20238 "2019-02-07T13:23:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alan\_vera](https://avatars.discourse-cdn.com/v4/letter/a/87869e/32.png) [@alan\_vera](https://forums.digi.com/u/alan_vera)\
**Post date:** [February 7, 2019, 1:23pm UTC](https://forums.digi.com/t/can-i-create-a-digimesh-network-replacing-xbee-grove-development-board-with-arduinos/20238/1 "2019-02-07T13:23:59Z")

</div>



---

<div class="post-metadata">

**Author:** ![DystopianFerret](https://avatars.discourse-cdn.com/v4/letter/d/71e660/32.png) [@DystopianFerret](https://forums.digi.com/u/DystopianFerret)\
**Post date:** [February 13, 2019, 5:23pm UTC](https://forums.digi.com/t/can-i-create-a-digimesh-network-replacing-xbee-grove-development-board-with-arduinos/20238/2 "2019-02-13T17:23:30Z")

</div>

Yes, the required pin connections are VCC, GND, DIN, DOUT, RTS, DTR