# can the pro 900 and 900 XSC work together

**URL:** <https://forums.digi.com/t/can-the-pro-900-and-900-xsc-work-together/2076>\
**Category:** XBee - Point-to-Point/Multi-Point\
**Created:** [December 31, 2010, 6:24am UTC](https://forums.digi.com/t/can-the-pro-900-and-900-xsc-work-together/2076 "2010-12-31T06:24:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![kellware](https://avatars.discourse-cdn.com/v4/letter/k/e5b9ba/32.png) [@kellware](https://forums.digi.com/u/kellware)\
**Post date:** [December 31, 2010, 6:24am UTC](https://forums.digi.com/t/can-the-pro-900-and-900-xsc-work-together/2076/1 "2010-12-31T06:24:18Z")

</div>

I;ve been using a range of series 2 xbees for some remote monitoring projects, and have recently bought a pair of pro 900’s to run a slightly long range project. I’ve borrowed a 900 XSC for some tests to see if they can work with the 900’s I currently have But have not had any success.

I;ve set the VID’s and related parameters to match, have set the baud rates… am I missing something or trying the impossible? thanks in advance for any tips.