# CC-MX-JN58-Z1: How to enable usdhc1 interface

**URL:** https://forums.digi.com/t/cc-mx-jn58-z1-how-to-enable-usdhc1-interface/20589
**Category:** Linux
**Tags:** connectcore, 6ul
**Created:** [June 26, 2019, 3:21pm UTC](https://forums.digi.com/t/cc-mx-jn58-z1-how-to-enable-usdhc1-interface/20589 "2019-06-26T15:21:49Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![ghermant](https://avatars.discourse-cdn.com/v4/letter/g/ce73a5/32.png) [@ghermant](https://forums.digi.com/u/ghermant)
#### Post date: [June 26, 2019, 3:21pm UTC](https://forums.digi.com/t/cc-mx-jn58-z1-how-to-enable-usdhc1-interface/20589/1 "2019-06-26T15:21:49Z")

</div>

Hi all,  
I was wondering if there’s a tip to enable the USDHC1 interface on the non-wireless connectcore 6UL module.  
I use in my custom design a non-wireless module. I wired the USDHC1 interface to a microSD socket (ball K19, L19, W19, L20, K20, M20).  
On the evaluation board, the USDHC2 is wired to the microsd socket (as the wireless variant uses USDHC1 for WLAN).  
Any ideas will be very appreciated.  
greg

---

<div class="post-metadata">

### Author: ![ghermant](https://avatars.discourse-cdn.com/v4/letter/g/ce73a5/32.png) [@ghermant](https://forums.digi.com/u/ghermant)
#### Post date: [June 27, 2019, 8:11am UTC](https://forums.digi.com/t/cc-mx-jn58-z1-how-to-enable-usdhc1-interface/20589/2 "2019-06-27T08:11:15Z")

</div>

Hi,  
Probably a problem with assembly process.  
Indeed by testing another prototype it works.