# Changed Smart Plug and now not so SMART!

**URL:** <https://forums.digi.com/t/changed-smart-plug-and-now-not-so-smart/2817>\
**Category:** Python\
**Created:** [January 18, 2012, 4:28pm UTC](https://forums.digi.com/t/changed-smart-plug-and-now-not-so-smart/2817 "2012-01-18T16:28:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rick\_king](https://avatars.discourse-cdn.com/v4/letter/r/ba9def/32.png) [@rick\_king](https://forums.digi.com/u/rick_king)\
**Post date:** [January 18, 2012, 4:28pm UTC](https://forums.digi.com/t/changed-smart-plug-and-now-not-so-smart/2817/1 "2012-01-18T16:28:41Z")

</div>

Hello, I have a series of smart plugs that needed to be replaced. I changed out 2 of them by editing the .yml file (just replaced the extended address within the .yml file the address of the new Smart Plug).  
I am able to see and manually manipulate the new Smart Plugs (ie; turn off/on the 120v output), but the new plugs no longer cycle as the other one did. These plugs are setuip to turn the lights off/on at set times.  
Is there something else I need to do in order to make these plugs function as the ones I am replacing??

Thanks
