# Changing advanced settings in win 10

**URL:** <https://forums.digi.com/t/changing-advanced-settings-in-win-10/20474>\
**Category:** Realport\
**Tags:** settings, driver\
**Created:** [May 8, 2019, 4:34pm UTC](https://forums.digi.com/t/changing-advanced-settings-in-win-10/20474 "2019-05-08T16:34:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mace](https://avatars.discourse-cdn.com/v4/letter/m/d9b06d/32.png) [@mace](https://forums.digi.com/u/mace)\
**Post date:** [May 8, 2019, 4:34pm UTC](https://forums.digi.com/t/changing-advanced-settings-in-win-10/20474/1 "2019-05-08T16:34:25Z")

</div>

Hi,

I want to use a DIGI TS2 Portserver. I installed the Driver on win10 x64. I want to change the IP-Adress. The manual says the following:

1. Right click My Computer.
2. Choose Properties \> Hardware \> Device Manager.
3. Locate Multi-port Serial Adapters and expand the list if necessary.
4. Choose the Digi terminal server device, right click and then choose  
Properties \> Advanced.

The problem is, there is no Advanced Tab in the Driver setup!  
How do I access these advanced settings?

Greetings Oliver