# COMMUNICATION PORT CONFIGURATION

**URL:** <https://forums.digi.com/t/communication-port-configuration/1133>\
**Category:** XBee - DigiMesh\
**Created:** [October 18, 2011, 8:55pm UTC](https://forums.digi.com/t/communication-port-configuration/1133 "2011-10-18T20:55:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tylerdurden](https://avatars.discourse-cdn.com/v4/letter/t/ce7236/32.png) [@tylerdurden](https://forums.digi.com/u/tylerdurden)\
**Post date:** [October 18, 2011, 8:55pm UTC](https://forums.digi.com/t/communication-port-configuration/1133/1 "2011-10-18T20:55:06Z")

</div>

Hello;  
I’m making the communication of a wireless temperature sensor coordinator. It seems that the communication works, but I see strange characters … How I can fix it?  
Thank you!

---

<div class="post-metadata">

**Author:** ![tylerdurden](https://avatars.discourse-cdn.com/v4/letter/t/ce7236/32.png) [@tylerdurden](https://forums.digi.com/u/tylerdurden)\
**Post date:** [October 19, 2011, 7:30pm UTC](https://forums.digi.com/t/communication-port-configuration/1133/2 "2011-10-19T19:30:01Z")

</div>

Moreover, ATIT command doesn’t work properly…
