# configuration update of XBee through arduino

**URL:** <https://forums.digi.com/t/configuration-update-of-xbee-through-arduino/15520>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** xbee-pro-s2b, arduino, xbee\
**Created:** [October 6, 2015, 8:56am UTC](https://forums.digi.com/t/configuration-update-of-xbee-through-arduino/15520 "2015-10-06T08:56:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![subbanarasaiah](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@subbanarasaiah](https://forums.digi.com/u/subbanarasaiah)\
**Post date:** [October 6, 2015, 8:56am UTC](https://forums.digi.com/t/configuration-update-of-xbee-through-arduino/15520/1 "2015-10-06T08:56:05Z")

</div>

Hi, presently i am working on Xbee.  
I want to change the configuration of XBee by Arduino through UART. like changing PAN ID to 2015 for example. I don’t want to use any tool like XCTU or any serial terminal program.  
is there anyway of doing it?? how?? what are the settings required??  
☹☹

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 6, 2015, 2:53pm UTC](https://forums.digi.com/t/configuration-update-of-xbee-through-arduino/15520/2 "2015-10-06T14:53:40Z")

</div>

Sure you can. You just need to use either AT command mode as described in the beginning of the AT command sections of the manuals for the XBee modules or use the proper API frames.