# configuration with 12 xbees **URL:** \ **Category:** XCTU\ **Tags:** input, clients, xbee\ **Created:** [July 11, 2013, 10:22am UTC](https://forums.digi.com/t/configuration-with-12-xbees/11706 "2013-07-11T10:22:09Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![max246](https://avatars.discourse-cdn.com/v4/letter/m/a5b964/32.png) [@max246](https://forums.digi.com/u/max246)\ **Post date:** [July 11, 2013, 10:22am UTC](https://forums.digi.com/t/configuration-with-12-xbees/11706/1 "2013-07-11T10:22:09Z")
I want to create a network of 12 Xbee clients and 1 server that gets all information from all of them. What I understood I have to put a “router” in the middle to split in two the network, 1 server -\> 1 router -\> 6 xbee -\> 1 router -\> 6 xbee Am I wrong? Also I would like to send the result of one pin that is going to be 0 or 1 ( push button ). When these devices are sending these information, there is a way to detect which was the client? Like client number 1 sent HIGH, client number 2 sent LOW, etc… I did some research and I understood that sending the HIGH and LOW is possible but I just need these two clarification 🙂 ---
**Author:** ![kjensen8](https://avatars.discourse-cdn.com/v4/letter/k/8e8cbc/32.png) [@kjensen8](https://forums.digi.com/u/kjensen8)\ **Post date:** [September 29, 2013, 4:14pm UTC](https://forums.digi.com/t/configuration-with-12-xbees/11706/2 "2013-09-29T16:14:39Z")
Digi’s 802.15.4 products can do line passing: [http://www.digi.com/support/kbase/kbaseresultdetl?id=3222](http://www.digi.com/support/kbase/kbaseresultdetl?id=3222) I’m not sure how to do it with series 2 radios though however.