# Connect Me and SIP protocol

**URL:** <https://forums.digi.com/t/connect-me-and-sip-protocol/4384>\
**Category:** NET+OS\
**Tags:** hardware\
**Created:** [September 26, 2012, 11:26pm UTC](https://forums.digi.com/t/connect-me-and-sip-protocol/4384 "2012-09-26T23:26:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rubber](https://avatars.discourse-cdn.com/v4/letter/r/47e85d/32.png) [@Rubber](https://forums.digi.com/u/Rubber)\
**Post date:** [September 26, 2012, 11:26pm UTC](https://forums.digi.com/t/connect-me-and-sip-protocol/4384/1 "2012-09-26T23:26:02Z")

</div>

Hi,

I have a question.  
There are SIP API for my Digi Connect ME?  
Can I use this protocol for my application in any way?

Thank you all!

---

<div class="post-metadata">

**Author:** ![kjensen8](https://avatars.discourse-cdn.com/v4/letter/k/8e8cbc/32.png) [@kjensen8](https://forums.digi.com/u/kjensen8)\
**Post date:** [September 29, 2012, 8:07pm UTC](https://forums.digi.com/t/connect-me-and-sip-protocol/4384/2 "2012-09-29T20:07:36Z")

</div>

Hi there,

The ME with it’s standard plug and play firmware does not support SIP. However Digi does sell a programmable version. You could develop your own ME firmware that supports SIP.

Here is the part number for it:  
[http://www.digi.com/products/model?mid=2076](http://www.digi.com/products/model?mid=2076)

Keith

---

<div class="post-metadata">

**Author:** ![Rubber](https://avatars.discourse-cdn.com/v4/letter/r/47e85d/32.png) [@Rubber](https://forums.digi.com/u/Rubber)\
**Post date:** [October 1, 2012, 3:28pm UTC](https://forums.digi.com/t/connect-me-and-sip-protocol/4384/3 "2012-10-01T15:28:30Z")

</div>

kjensen8,

thanks for the reply.  
I was hoping for some API or firmware already implemented.

Thanks