# Connect Port X2 Flash size

**URL:** <https://forums.digi.com/t/connect-port-x2-flash-size/13707>\
**Category:** NDS-based Gateways\
**Tags:** memory-available\
**Created:** [October 7, 2014, 2:27pm UTC](https://forums.digi.com/t/connect-port-x2-flash-size/13707 "2014-10-07T14:27:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bryang669](https://avatars.discourse-cdn.com/v4/letter/b/ce7236/32.png) [@bryang669](https://forums.digi.com/u/bryang669)\
**Post date:** [October 7, 2014, 2:27pm UTC](https://forums.digi.com/t/connect-port-x2-flash-size/13707/1 "2014-10-07T14:27:11Z")

</div>

The Specs list 8 MB Flash but the System information on the X2-Z11-EC-A shows

Total Flash Filesystem: 799 KB  
Used Flash Filesystem: 30 KB  
Free Flash Filesystem: 769 KB

Do I need to order a different device to get the full 8MB of flash? I am currently unable to upload DIA version 2.3.1

---

<div class="post-metadata">

**Author:** ![trooper2](https://avatars.discourse-cdn.com/v4/letter/t/edb3f5/32.png) [@trooper2](https://forums.digi.com/u/trooper2)\
**Post date:** [October 7, 2014, 3:56pm UTC](https://forums.digi.com/t/connect-port-x2-flash-size/13707/2 "2014-10-07T15:56:57Z")

</div>

On the Web GUI you should see under Administration - System Information:

Total Memory: 8192 KB  
Used Memory: XXXX KB  
Free Memory: XXXX KB

That said, the X2 may not have enough memory to run the DIA. I would recommend the X4 or the X2e.