# Connect Xbee Modules to Digi Remote Manager

**URL:** <https://forums.digi.com/t/connect-xbee-modules-to-digi-remote-manager/21516>\
**Category:** Device Manager\
**Tags:** xbee-remote-control, remote-manager\
**Created:** [July 1, 2020, 8:08am UTC](https://forums.digi.com/t/connect-xbee-modules-to-digi-remote-manager/21516 "2020-07-01T08:08:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MavisLee](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MavisLee](https://forums.digi.com/u/MavisLee)\
**Post date:** [July 1, 2020, 8:08am UTC](https://forums.digi.com/t/connect-xbee-modules-to-digi-remote-manager/21516/1 "2020-07-01T08:08:33Z")

</div>

Dear all,

Good day.

I’m currently doing a IOT Project using Xbee 3.0 modules, Digi Xbee Gateway and Digi Remote Manager.  
I managed to add all the XBee devices and Xbee Gateway to the Digi Remote Manager. Also, the Xbee gateway successfully connected to the Digi Remote Manager.

However, I failed to connect the Xbee Devices to the remote manager. I tried the connection strategies suggested in the user manual ([https://www.digi.com/resources/documentation/digidocs/90001436-13/default.htm#tasks/t\_set\_up\_device\_connection\_strategy.htm%3FTocPath%3DDevice%2520management|Connect%2520and%2520disconnect%2520devices|\_\_\_\_\_1](https://www.digi.com/resources/documentation/digidocs/90001436-13/default.htm#tasks/t_set_up_device_connection_strategy.htm%3FTocPath%3DDevice%2520management%7CConnect%2520and%2520disconnect%2520devices%7C _____ 1));  
However, I failed to access the “Advanced Configuration”.

May I know is there any other solutions to connect the Xbees devices with the remote manager?

Thanks a lot.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [July 1, 2020, 8:15am UTC](https://forums.digi.com/t/connect-xbee-modules-to-digi-remote-manager/21516/2 "2020-07-01T08:15:50Z")

</div>

Mavis,

This is the wrong part of the manual. You need to be looking at [https://www.digi.com/resources/documentation/digidocs/90001436-13/default.htm#concepts/c\_xb\_networks.htm%3FTocPath%3DXBee%2520networks|\_\_\_\_\_0](https://www.digi.com/resources/documentation/digidocs/90001436-13/default.htm#concepts/c_xb_networks.htm%3FTocPath%3DXBee%2520networks%7C _____ 0)

---

<div class="post-metadata">

**Author:** ![MavisLee](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MavisLee](https://forums.digi.com/u/MavisLee)\
**Post date:** [July 2, 2020, 8:50am UTC](https://forums.digi.com/t/connect-xbee-modules-to-digi-remote-manager/21516/3 "2020-07-02T08:50:12Z")

</div>

Hi Mvut,

Thanks a lot for the reply.

However, in order for me to enable the remote connection of Xbee modules in the remote manager, which settings that should I change?  
Can you give me some suggestions?

Thanks a lot.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [July 7, 2020, 1:36pm UTC](https://forums.digi.com/t/connect-xbee-modules-to-digi-remote-manager/21516/4 "2020-07-07T13:36:35Z")

</div>

There are no settings on the XBee gateway or XBee S2C or XBee 3 modules to enable the remote manager. The XBee modules are loaded into the Remote manager via the discover function in the Gateway and populated under the XBee network tab.