# Connectcore 6 Firmware problem

**URL:** <https://forums.digi.com/t/connectcore-6-firmware-problem/19103>\
**Category:** Linux\
**Tags:** sbc6\
**Created:** [January 25, 2018, 9:30am UTC](https://forums.digi.com/t/connectcore-6-firmware-problem/19103 "2018-01-25T09:30:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![gokhandogan](https://avatars.discourse-cdn.com/v4/letter/g/45deac/32.png) [@gokhandogan](https://forums.digi.com/u/gokhandogan)\
**Post date:** [January 25, 2018, 9:30am UTC](https://forums.digi.com/t/connectcore-6-firmware-problem/19103/1 "2018-01-25T09:30:38Z")

</div>

Dear Sir or Madem,

My connectcore 6 ,install Yocto demo image for emmc now no problem but how uninstall Yocto Project and new install Ubuntu image?. Where isthe ubuntu type image (Lubuntu, Kubuntu).

---

<div class="post-metadata">

**Author:** ![LeonidM](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@LeonidM](https://forums.digi.com/u/LeonidM)\
**Post date:** [January 31, 2018, 7:37am UTC](https://forums.digi.com/t/connectcore-6-firmware-problem/19103/2 "2018-01-31T07:37:36Z")

</div>

there is no ubuntu or kubuntu for cc6. You can build customized Yocto image similar to the demo you are talking about. you can find instructions here:  
[https://www.digi.com/resources/documentation/digidocs/90001546/#task/yocto/t\_install\_dey.htm](https://www.digi.com/resources/documentation/digidocs/90001546/#task/yocto/t_install_dey.htm)

---

<div class="post-metadata">

**Author:** ![fei4xu](https://avatars.discourse-cdn.com/v4/letter/f/6bbea6/32.png) [@fei4xu](https://forums.digi.com/u/fei4xu)\
**Post date:** [April 15, 2019, 4:46pm UTC](https://forums.digi.com/t/connectcore-6-firmware-problem/19103/3 "2019-04-15T16:46:33Z")

</div>

In that case, can I rebuild the whole Ubuntu from source and install it onto digi ConnectCore 6?

---

<div class="post-metadata">

**Author:** ![LeonidM](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@LeonidM](https://forums.digi.com/u/LeonidM)\
**Post date:** [April 15, 2019, 7:24pm UTC](https://forums.digi.com/t/connectcore-6-firmware-problem/19103/4 "2019-04-15T19:24:43Z")

</div>

sure, why not. You’ll just have to figure out hot to integrate cc6 kernel/device tree/bsp in to it