# Connectme: what is the minimum bandwidth used in the lan/wan?

**URL:** <https://forums.digi.com/t/connectme-what-is-the-minimum-bandwidth-used-in-the-lan-wan/14611>\
**Category:** Other & Legacy Products\
**Tags:** lan, connectme, bandwidth\
**Created:** [March 27, 2015, 8:15am UTC](https://forums.digi.com/t/connectme-what-is-the-minimum-bandwidth-used-in-the-lan-wan/14611 "2015-03-27T08:15:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ste010101](https://avatars.discourse-cdn.com/v4/letter/s/b5a626/32.png) [@ste010101](https://forums.digi.com/u/ste010101)\
**Post date:** [March 27, 2015, 8:15am UTC](https://forums.digi.com/t/connectme-what-is-the-minimum-bandwidth-used-in-the-lan-wan/14611/1 "2015-03-27T08:15:24Z")

</div>

Connectme: what is the minimum bandwidth used in the lan/wan by the device when no data are transmitted in the application layer of the protocol?  
Condition: connectme connected to the LAN and the driver installed on a laptop. The driver is bind with the connectme.  
Thanks in advice

---

<div class="post-metadata">

**Author:** ![Campbell](https://avatars.discourse-cdn.com/v4/letter/c/97f17d/32.png) [@Campbell](https://forums.digi.com/u/Campbell)\
**Post date:** [September 15, 2015, 1:43pm UTC](https://forums.digi.com/t/connectme-what-is-the-minimum-bandwidth-used-in-the-lan-wan/14611/2 "2015-09-15T13:43:57Z")

</div>

Assuming you are using the PlugnPlay version of ConnectME, you can look at Chapter 6 on bandwith determination  
[http://ftp1.digi.com/support/documentation/90000565\_R.pdf](http://ftp1.digi.com/support/documentation/90000565_R.pdf)