# Coordinator does not respond to many-to-one request

**URL:** <https://forums.digi.com/t/coordinator-does-not-respond-to-many-to-one-request/15377>\
**Category:** XBee - 802.15.4\
**Tags:** one-to-many, coordinator, source, routing\
**Created:** [September 8, 2015, 8:17am UTC](https://forums.digi.com/t/coordinator-does-not-respond-to-many-to-one-request/15377 "2015-09-08T08:17:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hwestbrook](https://avatars.discourse-cdn.com/v4/letter/h/5f9b8f/32.png) [@hwestbrook](https://forums.digi.com/u/hwestbrook)\
**Post date:** [September 8, 2015, 8:17am UTC](https://forums.digi.com/t/coordinator-does-not-respond-to-many-to-one-request/15377/1 "2015-09-08T08:17:57Z")

</div>

My network consists of 1 coordinator, 10 or so routers and 50 or so end devices.

I am using a mixture of many-to-one and source routing to control most of the network from one of the routers.

When I first setup the network the coordinator would respond to many-to-one route requests. Now it does not do so. I’ve done a power reset and updated some settings, but this does not affect whether it responds.

Is this expected behavior? Seems that this should respond to the many-to-one (AR) requests).

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 10, 2015, 2:25pm UTC](https://forums.digi.com/t/coordinator-does-not-respond-to-many-to-one-request/15377/2 "2015-09-10T14:25:42Z")

</div>

Sounds like the Coordinator is not on your network or you are not issuing the AR command that often. To resolve, try issuing a network reset with a 1 and then re-issue the AR command.