# Coordinator Issues

**URL:** <https://forums.digi.com/t/coordinator-issues/20877>\
**Category:** XBee - Zigbee\
**Tags:** zigbee3, xbee3\
**Created:** [November 6, 2019, 2:10pm UTC](https://forums.digi.com/t/coordinator-issues/20877 "2019-11-06T14:10:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![juan\_macias](https://avatars.discourse-cdn.com/v4/letter/j/3d9bf3/32.png) [@juan\_macias](https://forums.digi.com/u/juan_macias)\
**Post date:** [November 6, 2019, 2:10pm UTC](https://forums.digi.com/t/coordinator-issues/20877/1 "2019-11-06T14:10:01Z")

</div>

I’m Testing two micro Xbee3 modules, updated the lastest firmware. setting one as a coordinator CE=1, and the other one as a Router CE=1, both on transparent mode. when I try to send data from the router to the coordinator all seems to be ok, but when I try to comunicate backgards, the coordinator returns any character that I’m sendind at the time. and its not transmiting anything. any advice?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [November 13, 2019, 9:09am UTC](https://forums.digi.com/t/coordinator-issues/20877/2 "2019-11-13T09:09:56Z")

</div>

Check your destination address files in your Coordinator. You probably have it set for self address.
