# Could you tell me How to use "Route Request Command"?

**URL:** <https://forums.digi.com/t/could-you-tell-me-how-to-use-route-request-command/17257>\
**Category:** XBee & XBee Gateway\
**Tags:** xbee, routing-table\
**Created:** [August 16, 2016, 10:57pm UTC](https://forums.digi.com/t/could-you-tell-me-how-to-use-route-request-command/17257 "2016-08-16T22:57:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SungPum](https://avatars.discourse-cdn.com/v4/letter/s/b77776/32.png) [@SungPum](https://forums.digi.com/u/SungPum)\
**Post date:** [August 16, 2016, 10:57pm UTC](https://forums.digi.com/t/could-you-tell-me-how-to-use-route-request-command/17257/1 "2016-08-16T22:57:59Z")

</div>

Could you tell me How to use “Route Request Command”?  
I konw the general format of the Route Request Command from this document, page …

* * *

> **[Intranet DEIB](https://intranet.deib.polimi.it/ita/)**

## ※ page 343/604

But i don’t know how to send it using XCTU,  
since I could not find any thing related to it in X-CTU

Could you tell me how to send it using X-CTU?  
In addition, could you tell me how to send it in API mode?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [August 18, 2016, 10:49am UTC](https://forums.digi.com/t/could-you-tell-me-how-to-use-route-request-command/17257/2 "2016-08-18T10:49:37Z")

</div>

Try looking at Digi’s product manual for the module in question. There is information in it about the rout request and how to obtain it.