# Creating Network with XBee Pro Series 2C XBP24-CZ7WIT-004

**URL:** <https://forums.digi.com/t/creating-network-with-xbee-pro-series-2c-xbp24-cz7wit-004/17480>\
**Category:** XBee & XBee Gateway\
**Tags:** xbee-pro-s2bc, xbee\
**Created:** [September 30, 2016, 2:12pm UTC](https://forums.digi.com/t/creating-network-with-xbee-pro-series-2c-xbp24-cz7wit-004/17480 "2016-09-30T14:12:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mustafagokce09](https://avatars.discourse-cdn.com/v4/letter/m/ea5d25/32.png) [@mustafagokce09](https://forums.digi.com/u/mustafagokce09)\
**Post date:** [September 30, 2016, 2:12pm UTC](https://forums.digi.com/t/creating-network-with-xbee-pro-series-2c-xbp24-cz7wit-004/17480/1 "2016-09-30T14:12:31Z")

</div>

Hi.  
I want to create a network with my XBee Pro Series 2C XBP24-CZ7WIT-004 modules.  
I have many of them.  
In my network i want to have one coordinator and multiple end devices.  
Which function set should i use and how can i configure my modules as coordinator and end devices individually?  
Thanks for your answers.

---

<div class="post-metadata">

**Author:** ![asgm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/asgm/32/3688_2.png) [@asgm](https://forums.digi.com/u/asgm)\
**Post date:** [October 3, 2016, 4:43am UTC](https://forums.digi.com/t/creating-network-with-xbee-pro-series-2c-xbp24-cz7wit-004/17480/2 "2016-10-03T04:43:53Z")

</div>

By default S2C modules are configured to act as ‘Router’.

To set it as Coordinator, change CE=1 [Enabled]

To set it as End Device, keep CE=0 and set SM=any non zero value i.e. enable anyone Sleep Mode.