# Crystal oscillator and PLL?

**URL:** <https://forums.digi.com/t/crystal-oscillator-and-pll/4536>\
**Category:** NET+OS\
**Created:** [October 15, 2003, 5:49am UTC](https://forums.digi.com/t/crystal-oscillator-and-pll/4536 "2003-10-15T05:49:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![fahrni](https://avatars.discourse-cdn.com/v4/letter/f/7bcc69/32.png) [@fahrni](https://forums.digi.com/u/fahrni)\
**Post date:** [October 15, 2003, 5:49am UTC](https://forums.digi.com/t/crystal-oscillator-and-pll/4536/1 "2003-10-15T05:49:45Z")

</div>

I wondered whether it is possible to use a TTL-clock-signal on XTAL1 for the internal PLL of the NetARM+50-3. In the Net+50/20M Hardware Reference p.130/556 it is shown, that the PLL is disabled by not using a crystal. Thanks! Chris

---

<div class="post-metadata">

**Author:** ![muscleman](https://avatars.discourse-cdn.com/v4/letter/m/f1d935/32.png) [@muscleman](https://forums.digi.com/u/muscleman)\
**Post date:** [October 17, 2003, 5:56pm UTC](https://forums.digi.com/t/crystal-oscillator-and-pll/4536/2 "2003-10-17T17:56:29Z")

</div>

There are two ways that you generate the system clock: 1- Ext. osc. hooked to XTAL1 directly. For this you have to disable the pll by asserting the PLLTST\* pin active low and pll active. 2- A Crystal of 18.432MHz hooked in between XTAL1 and XTAL2 while pll active.
