# DC debugging problem 3100 core

**URL:** <https://forums.digi.com/t/dc-debugging-problem-3100-core/9909>\
**Category:** Rabbit\
**Created:** [June 13, 2007, 5:07pm UTC](https://forums.digi.com/t/dc-debugging-problem-3100-core/9909 "2007-06-13T17:07:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jeremieworld](https://avatars.discourse-cdn.com/v4/letter/j/da6949/32.png) [@jeremieworld](https://forums.digi.com/u/jeremieworld)\
**Post date:** [June 13, 2007, 5:07pm UTC](https://forums.digi.com/t/dc-debugging-problem-3100-core/9909/1 "2007-06-13T17:07:10Z")

</div>

I’m a new user with DC. I begin with a simple program ‘controlled.c’.  
After turning the power on, connecting the target, compile BIOS (till here everything is good), I Compile and run the program.

An error display “while debugging :Timeout while waiting for response from target”

I am connected with serial port (115200 baud rate)…

Thank you for your help.  
😕
