# Did Digi fixed the i2c conflict for the WSVGA 10"?

**URL:** <https://forums.digi.com/t/did-digi-fixed-the-i2c-conflict-for-the-wsvga-10/20284>\
**Category:** Linux\
**Tags:** i2c, touchscreen, and, chip, sound\
**Created:** [February 25, 2019, 3:17pm UTC](https://forums.digi.com/t/did-digi-fixed-the-i2c-conflict-for-the-wsvga-10/20284 "2019-02-25T15:17:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pof99](https://avatars.discourse-cdn.com/v4/letter/p/bbce88/32.png) [@pof99](https://forums.digi.com/u/pof99)\
**Post date:** [February 25, 2019, 3:17pm UTC](https://forums.digi.com/t/did-digi-fixed-the-i2c-conflict-for-the-wsvga-10/20284/1 "2019-02-25T15:17:52Z")

</div>

I know the Connectcore SBC has an issue with the i2c bus conflict with the touchscreen and the sound chip with the 10WSVGA screen. DIGI was supposed to work on a solution. Did they fixed it?

---

<div class="post-metadata">

**Author:** ![LeonidM](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@LeonidM](https://forums.digi.com/u/LeonidM)\
**Post date:** [February 27, 2019, 10:14am UTC](https://forums.digi.com/t/did-digi-fixed-the-i2c-conflict-for-the-wsvga-10/20284/2 "2019-02-27T10:14:22Z")

</div>

The 10" WSVGA is intended to work with Connect core 6 kit. It does not work with Connect Core 6ul due to the i2c conflict you mention. There is a 7" LCD kit [https://www.digi.com/products/models/cc-acc-lcd-70wv](https://www.digi.com/products/models/cc-acc-lcd-70wv) that is intended for cc6ul. There are no plans to modify the design of cc6ul SBC to make it work with 10" kit.