# Digi Acceleport 2r 920 (rev 01) and Fedora Core 5 **URL:** \ **Category:** USB Devices\ **Created:** [May 23, 2007, 9:50am UTC](https://forums.digi.com/t/digi-acceleport-2r-920-rev-01-and-fedora-core-5/7784 "2007-05-23T09:50:02Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![hulbs9nw](https://avatars.discourse-cdn.com/v4/letter/h/96bed5/32.png) [@hulbs9nw](https://forums.digi.com/u/hulbs9nw)\ **Post date:** [May 23, 2007, 9:50am UTC](https://forums.digi.com/t/digi-acceleport-2r-920-rev-01-and-fedora-core-5/7784/1 "2007-05-23T09:50:02Z")
lspci shows: 01:05.0 Communication controller: Digi International AccelePort 2r 920 (rev 01) Followed instructions as per Relnotes.txt but I get the following error: make[1]: Entering directory `/usr/src/redhat/BUILD/dgap-1.3/driver' make -C /lib/modules/2.6.15-1.2054_FC5/build SUBDIRS=$PWD modules MYPWD=/usr/src/redhat/BUILD/dgap-1.3/driver make[2]: Entering directory `/usr/src/kernels/2.6.15-1.2054\_FC5-i686’ CC [M] /usr/src/redhat/BUILD/dgap-1.3/driver/dgap\_driver.o CC [M] /usr/src/redhat/BUILD/dgap-1.3/driver/dgap\_fep5.o /usr/src/redhat/BUILD/dgap-1.3/driver/dgap\_fep5.c: In function ‘dgap\_event’: /usr/src/redhat/BUILD/dgap-1.3/driver/dgap\_fep5.c:1781: error: ‘struct tty\_struct’ has no member named ‘flip’ /usr/src/redhat/BUILD/dgap-1.3/driver/dgap\_fep5.c:1782: error: ‘struct tty\_struct’ has no member named ‘flip’ /usr/src/redhat/BUILD/dgap-1.3/driver/dgap\_fep5.c:1783: error: ‘struct tty\_struct’ has no member named ‘flip’ make[3]: \*\*\* [/usr/src/redhat/BUILD/dgap-1.3/driver/dgap\_fep5.o] Error 1 make[2]: \*\*\* [_module_/usr/src/redhat/BUILD/dgap-1.3/driver] Error 2 make[2]: Leaving directory `/usr/src/kernels/2.6.15-1.2054_FC5-i686' make[1]: *** [build] Error 2 make[1]: Leaving directory `/usr/src/redhat/BUILD/dgap-1.3/driver’ make: \*\*\* [build] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.85834 (%build) I get exactly the same error whether I use ./configure DISTRO=FEDORA or rpmbuild using the DISTRO line. I am using the latest drivers from the website (40002347\_c.src.rpm) and I believe I have the correct kernel source (kernel-2.6.15-1.2054\_FC5.src.rpm = uname -r 2.6.15-1.2054\_FC5) Any help would be much appreciated. Thanks in advance. ---
**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\ **Post date:** [May 23, 2007, 12:21pm UTC](https://forums.digi.com/t/digi-acceleport-2r-920-rev-01-and-fedora-core-5/7784/2 "2007-05-23T12:21:34Z")
You will want to try the pre-release driver at: ftp://ftp1.digi.com/support/beta/linux/dgap/dgap-1.3-12.src.rpm ---
**Author:** ![hulbs9nw](https://avatars.discourse-cdn.com/v4/letter/h/96bed5/32.png) [@hulbs9nw](https://forums.digi.com/u/hulbs9nw)\ **Post date:** [May 23, 2007, 1:08pm UTC](https://forums.digi.com/t/digi-acceleport-2r-920-rev-01-and-fedora-core-5/7784/3 "2007-05-23T13:08:42Z")
Thank you for the reply. Using this pre-release I get exactly the same error. ---
**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\ **Post date:** [May 23, 2007, 1:14pm UTC](https://forums.digi.com/t/digi-acceleport-2r-920-rev-01-and-fedora-core-5/7784/4 "2007-05-23T13:14:56Z")
Try using the pre-release driver with the following installation flags: rpmbuild --rebuild --define DISTRO=FEDORA --define NEW\_TTY\_BUFFERING=yes dgap-1.3-12.src.rpm If this does not work, I suggest sending a full log of the installation errors to Digi Tech. Support. ---
**Author:** ![hulbs9nw](https://avatars.discourse-cdn.com/v4/letter/h/96bed5/32.png) [@hulbs9nw](https://forums.digi.com/u/hulbs9nw)\ **Post date:** [May 23, 2007, 1:31pm UTC](https://forums.digi.com/t/digi-acceleport-2r-920-rev-01-and-fedora-core-5/7784/5 "2007-05-23T13:31:53Z")
Thanks again but still no joy i’ll try tech support.