# Digi AccelePort  Xem ISA/PCI

**URL:** <https://forums.digi.com/t/digi-acceleport-xem-isa-pci/7709>\
**Category:** USB Devices\
**Created:** [March 10, 2004, 6:02am UTC](https://forums.digi.com/t/digi-acceleport-xem-isa-pci/7709 "2004-03-10T06:02:35Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![will](https://avatars.discourse-cdn.com/v4/letter/w/90ced4/32.png) [@will](https://forums.digi.com/u/will)\
**Post date:** [March 10, 2004, 6:02am UTC](https://forums.digi.com/t/digi-acceleport-xem-isa-pci/7709/1 "2004-03-10T06:02:35Z")

</div>

I am currently experiencing the following problem:

I am using a HP proliant DL 320 server. When I insert the card for the Digi AccelePort Xem ISA/PCI (8 ports) and then start up the HP server which is running Win2k I get a blue screen with the following error:

Hardware Malfunction  
NMI: parity check/memory parity error  
the system has halted

what is causing that error. Could it be an incompatibilty issue? am i missing something?. we have 4 HP servers and I have tried to use the card on all four of them and each time i got the same error. Some help would be greatly appreciated. Has anyone experienced this error before?

---

<div class="post-metadata">

**Author:** ![Jennifer](https://avatars.discourse-cdn.com/v4/letter/j/46a35a/32.png) [@Jennifer](https://forums.digi.com/u/Jennifer)\
**Post date:** [March 10, 2004, 3:21pm UTC](https://forums.digi.com/t/digi-acceleport-xem-isa-pci/7709/2 "2004-03-10T15:21:26Z")

</div>

Have you run the hardware diagnostics on the card to rule out faulty hardware? You can find the diagnostics here: [http://ftp.digi.com/support/utilities/async/](http://ftp.digi.com/support/utilities/async/).

---

<div class="post-metadata">

**Author:** ![will](https://avatars.discourse-cdn.com/v4/letter/w/90ced4/32.png) [@will](https://forums.digi.com/u/will)\
**Post date:** [March 10, 2004, 10:53pm UTC](https://forums.digi.com/t/digi-acceleport-xem-isa-pci/7709/3 "2004-03-10T22:53:28Z")

</div>

I doubt that it is a faulty hardware.I have two cards and both of them cause the same error!.

---

<div class="post-metadata">

**Author:** ![will](https://avatars.discourse-cdn.com/v4/letter/w/90ced4/32.png) [@will](https://forums.digi.com/u/will)\
**Post date:** [March 11, 2004, 12:26am UTC](https://forums.digi.com/t/digi-acceleport-xem-isa-pci/7709/4 "2004-03-11T00:26:13Z")

</div>

Please also note that after I install the card I can’t get into the operating system.

---

<div class="post-metadata">

**Author:** ![jim1](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@jim1](https://forums.digi.com/u/jim1)\
**Post date:** [April 12, 2004, 2:59pm UTC](https://forums.digi.com/t/digi-acceleport-xem-isa-pci/7709/5 "2004-04-12T14:59:00Z")

</div>

Test the Digi adapters by installing them into another (non-DL320) system. If the adapters allow the system to boot into the operating system, contact HP for a replacement of the backplane of the DL320.