# Digi Connect ME over TCP Port 2101

**URL:** <https://forums.digi.com/t/digi-connect-me-over-tcp-port-2101/4356>\
**Category:** Plug N' Play\
**Tags:** hardware\
**Created:** [February 8, 2012, 1:34pm UTC](https://forums.digi.com/t/digi-connect-me-over-tcp-port-2101/4356 "2012-02-08T13:34:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![royw](https://avatars.discourse-cdn.com/v4/letter/r/e9bcb4/32.png) [@royw](https://forums.digi.com/u/royw)\
**Post date:** [February 8, 2012, 1:34pm UTC](https://forums.digi.com/t/digi-connect-me-over-tcp-port-2101/4356/1 "2012-02-08T13:34:45Z")

</div>

Hello,

I will connect to the Digi Module over TCP Port 2101.  
So far it works, I can write and read bytes from the UART.

But how can I change the baudrate of the UART remotely ?

I will not use the virtual Comport.

I use Delphi 7 …

Thnaks in advance

---

<div class="post-metadata">

**Author:** ![bobthomas13](https://avatars.discourse-cdn.com/v4/letter/b/958977/32.png) [@bobthomas13](https://forums.digi.com/u/bobthomas13)\
**Post date:** [March 1, 2012, 6:23am UTC](https://forums.digi.com/t/digi-connect-me-over-tcp-port-2101/4356/2 "2012-03-01T06:23:53Z")

</div>

If you have access to webui you can change it.  
Or else telnet into the device and use command to change baud rate.  
Refer [http://ftp1.digi.com/support/documentation/90000566\_K.pdf](http://ftp1.digi.com/support/documentation/90000566_K.pdf)