# DIGI Connect WI-SP Power LED blinking RED continously

**URL:** <https://forums.digi.com/t/digi-connect-wi-sp-power-led-blinking-red-continously/17878>\
**Category:** Serial Servers & Infrastructure Mangement\
**Tags:** connect, wi-sp, digi\
**Created:** [January 11, 2017, 7:55am UTC](https://forums.digi.com/t/digi-connect-wi-sp-power-led-blinking-red-continously/17878 "2017-01-11T07:55:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![conordyr](https://avatars.discourse-cdn.com/v4/letter/c/df705f/32.png) [@conordyr](https://forums.digi.com/u/conordyr)\
**Post date:** [January 11, 2017, 7:55am UTC](https://forums.digi.com/t/digi-connect-wi-sp-power-led-blinking-red-continously/17878/1 "2017-01-11T07:55:01Z")

</div>

MY Digi connect WI-SP stopped communicating and the power LED is now just flashing red, any ideas as how to troubleshoot or what is wrong?

---

<div class="post-metadata">

**Author:** ![jeremym](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@jeremym](https://forums.digi.com/u/jeremym)\
**Post date:** [January 12, 2017, 5:52pm UTC](https://forums.digi.com/t/digi-connect-wi-sp-power-led-blinking-red-continously/17878/2 "2017-01-12T17:52:35Z")

</div>

Is it flashing a certain repeating pattern, for example, a blink then a pause then a few blinks, then pause? Or it it just constantly blinking red/off?

Are you open to attempting to factory reset the unit to see if that helps?

---

<div class="post-metadata">

**Author:** ![conordyr](https://avatars.discourse-cdn.com/v4/letter/c/df705f/32.png) [@conordyr](https://forums.digi.com/u/conordyr)\
**Post date:** [January 17, 2017, 8:43am UTC](https://forums.digi.com/t/digi-connect-wi-sp-power-led-blinking-red-continously/17878/3 "2017-01-17T08:43:38Z")

</div>

Actually yes, its like 3-pause-4-pause-6-pause- etc.It repeats like that althoguh the pauses are very short. I just tried to perform a factory reset but it doesnt seem to be peforming.

1. Disconnect power
2. Hold in reset button
3. Reconnect power  
But the pattern is still not changing?

---

<div class="post-metadata">

**Author:** ![jeremym](https://avatars.discourse-cdn.com/v4/letter/j/58f4c7/32.png) [@jeremym](https://forums.digi.com/u/jeremym)\
**Post date:** [January 20, 2017, 6:15pm UTC](https://forums.digi.com/t/digi-connect-wi-sp-power-led-blinking-red-continously/17878/4 "2017-01-20T18:15:53Z")

</div>

If you haven’t already, can you try recovering the unit by following the instructions in this KB article?

[http://knowledge.digi.com/articles/Knowledge\_Base\_Article/Recovery-Procedure-for-Digi-Connect-Wi-SP](http://knowledge.digi.com/articles/Knowledge_Base_Article/Recovery-Procedure-for-Digi-Connect-Wi-SP)