# Digi One SP very sensative to latency

**URL:** <https://forums.digi.com/t/digi-one-sp-very-sensative-to-latency/6745>\
**Category:** Portserver TS\
**Created:** [July 6, 2006, 2:58am UTC](https://forums.digi.com/t/digi-one-sp-very-sensative-to-latency/6745 "2006-07-06T02:58:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/digi/original/1X/11da31a6a1fbcd03ef21d3f785c317c824009ae2.png) [@system](https://forums.digi.com/u/system)\
**Post date:** [July 6, 2006, 2:58am UTC](https://forums.digi.com/t/digi-one-sp-very-sensative-to-latency/6745/1 "2006-07-06T02:58:57Z")

</div>

I have deployed 24 Digi One SP devices all over Australia and they generally work a treat. The only issue I have is that they are extremly sensative to Latency on the network.

Is there any setting I can apply they will improve this.

---

<div class="post-metadata">

**Author:** ![michaelt](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/michaelt/32/92_2.png) [@michaelt](https://forums.digi.com/u/michaelt)\
**Post date:** [July 6, 2006, 2:00pm UTC](https://forums.digi.com/t/digi-one-sp-very-sensative-to-latency/6745/2 "2006-07-06T14:00:03Z")

</div>

I’m not sure what your current configuration is, but there is an “optimization” setting which can be set as latency (serial data sent immediately) or throughput (default, serial data buffered then sent for higher throughput).

This may be something you’d want to contact Technical Support via online support request however, since troubleshooting this may involve getting ethernet traces, etc.