# Digi PortServer CM32

**URL:** <https://forums.digi.com/t/digi-portserver-cm32/6421>\
**Category:** Digi CM & Passport\
**Created:** [December 4, 2012, 4:06pm UTC](https://forums.digi.com/t/digi-portserver-cm32/6421 "2012-12-04T16:06:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![yellowchops](https://avatars.discourse-cdn.com/v4/letter/y/db5fbb/32.png) [@yellowchops](https://forums.digi.com/u/yellowchops)\
**Post date:** [December 4, 2012, 4:06pm UTC](https://forums.digi.com/t/digi-portserver-cm32/6421/1 "2012-12-04T16:06:23Z")

</div>

Hello.

I just received a brand new Digi PortServer CM32. I am able to login through the console and set an IP; however, the Ethernet interface does come up correctly. I’ve tried using a dumb switch and cross over cable, but I still cannot access the IP (either access to the Digi PortServer CM32 or access from Digi PortServer CM32 to anything else). The link light comes on, but I still cannot get any network access.

Lastly, when I do a ‘ifconfig’ via the console port I see eth0 with the IP I set and I also see eth0:1-32 with 192.168.101.# (‘#’ being an incrementing number).

Thank you.